Sony CFD-S40CP Operating Instructions - Page 18

Creating your own program (Program Play) You can arrange the playing order of up to 20 tracks on a CD. To cancel Program Play Press MODE until "PGM" disappears from the display. To check the order of tracks before play Press DISPLAY/ENTER•MEMORY. Every time you press the button, the track number appears in the programed order. MODE DISPLAY/ ENTER MEMORY Jog dial To change the current program Press x once if the CD is stopped and twice if the CD is playing. The current program will be erased. Then create a new program following the programing procedure. u x 1 Press x. "CD" appears in the display. 2 Press MODE until "PGM" appears in the display. When playing MP3 files • In TRACK mode, you can program up to 20 files the same as you would for audio CD tracks. • In FOLDER mode, you can program up to 20 folders and play all tracks in the programmed folder in the programmed order. 3 Turn the jog dial to select the track you want to program, and press DISPLAY/ ENTER•MEMORY. Repeat this step. Programed track Playing order 4 Press u to start program play. Programed folder Playing order Tips • You can play the same program again, since the program is saved until you open the CD compartment. • You can record your own program. After you've created the program, insert a blank tape and press z to start recording. • The resume function doesn't work during Program Play. On the remote 1 Press x. 2 Press MODE until "PGM" appears in the display. 3 Press the number buttons for the tracks you want to program in the order you want. 4 Press N. 18