Sony CPD-200ES Operating Instructions (primary manual) - Page 5

Adjustments When One of the preset-type signals is input, no picture adjustment is necessary. You can, however, adjust the picture to your preferences by following the procedure described below. You can adjust all items on the OSD (On Screen Display). Control Panel fIF SET C0105 GEOM SIZE Cf 511 11 F- 1 Adjusting the Picture Contrast The adjustment data becomes the common setting for all input signals. l'ress the button. The "IIRICI ITNESS/CONTRAST" O51) appears BRIGHTNESS/CONTRAST J 1 50 31 .5kHz/70Hz Horizontal Vertical frequency* frequency: 2 Press the 0 buttons to adjust picture contrast. . . . for more contrast for less contrast The "BRIGHTNESS/CONTRAST" OSD d sappears3seconds after you release the buttons. To reset, press the RESET button while the OSD is on. Adjusting the Picture Brightness The adjustment data becomes the common setting for all input signals. 41 Press the O t /4 button. The "BRIGHTNESS/CONTRAST" OSD appears. - -0 + BRIGHTNESS/CONTRAST is rij 100 El 31 .5kHz/70Hz Horizontal Vertical frequency* frequency, 2 Press the 0 - f/4 , buttons to adjust picture brightness. ♦ . . . for less brightness t . . . for more brightness The "BRIGHTNESS/CONTRAST" O51) disappears 3 seconds after you release the buttons. "1"o reset, press the RESET button while the OS!) is on. • Before adjusting the items, turn on the unit and teed the video signal from the connected computer/work station. • Adjustments will be stored automatically. - I+ CC - D •0, Adjusting the Picture Centering '1 he adjustment data becomes the IndIVICillai Slitting tar each input signal received. 41 Press the CENTER button. I he "CENTER" OSD appears. CENTER CENTER MINE [ 32 it] LEI 68 2 For vertical adjustment Press the 0 t/4- buttons. - 0- + J0r to move up to move down For horizontal adjustment Press the f 4/••I buttons. - 3 4O to move left to move right- To erase the 'CENTER" OSD, press the CENTER button again. The "CENTER" OSD automatically disappears 10 seconds after you release the buttons. To reset, press the RESET button while the OSD is on. :JJ The horizontal and vertical frequencies for each input signal received appear on the "BRIGHTNESS/CONTRAST" OSD. 5