Sony D-EJ626CK Primary User Manual - Page 22
Troubleshooting, when a CD is placed
View all Sony D-EJ626CK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Troubleshooting Should any problem persist after you have checked these symptoms, consult your nearest Sony dealer. Symptom The volume does not increase even if you press the VOLUME + button repeatedly. Cannot adjust the volume. No sound, or noise is heard. The playing time is too short when powered with the dry batteries. The playing time is too short when powered with the rechargeable batteries. When you press u, "Lo batt" or "00" appears in the display. The CD does not play. "HI dc In" appears in the display. The CD does not play or "no dISC" appears in the display when a CD is placed in the CD player. "Hold" appears in the display when you press a button, and the CD does not play. The CD player does not start charging. Playback starts from the point you stopped. (resume function) Cause and/or corrective actions c Set the AVLS switch to "NORM." (page 12) c The headphones are connected to the LINE OUT jack. Connect them to the i (headphones) jack. c The headphones are connected to the LINE OUT jack. Connect them to the i (headphones) jack. c Connect the plugs firmly. (page 6) c Plugs are dirty. Clean the plugs with a dry soft cloth periodically. c Check that you are using alkaline batteries and not manganese batteries. (page 19) c Replace the batteries with new LR6 (size AA) alkaline batteries. (page 19) c Charge and discharge the rechargeable batteries several times. (pages 17, 18) c The rechargeable batteries are used up completely. Charge the batteries. (page 17) c Replace the batteries with new LR6 (size AA) alkaline batteries. (page 19) c Use only the AC power adaptor or car battery cord in "Accessories (supplied/optional)." (page 24) c Remove all power sources, then insert the batteries or connect the AC power adaptor/car battery cord again. (pages 6, 17 - 19) c The CD is dirty or defective. (page 20) c Check that the CD is inserted with the label side up. (page 6) c Moisture condensation has occurred. Leave the CD player aside for several hours until the moisture evaporates. c Close the lid of the battery compartment firmly. (page 17) c Make sure the batteries are inserted correctly. (pages 17 - 19) c Connect the AC power adaptor to an AC outlet securely. (page 17) c The CD-R/CD-RW was not finalized. Finalize the CD-R/CD-RW with the recording device. c There is a problem with the quality of the CD-R/CD-RW, recording device, or application software. c The buttons are locked. Slide the HOLD switch back. (page 12) c During stop, press x/CHG. (page 18) c The resume function is working. To start play from the first track, open the lid of the CD player; or remove all power sources, then insert the batteries or connect the AC power adaptor/car battery cord again. (pages 6, 17 - 19) 22