Sony D-F200 Operating Instructions (primary manual) - Page 7

Playing a CD To Play (from the point you stopped) Play (from the first track) Pause Stop Find the beginning of the current track (AMS*1) Find the beginning of the previous tracks (AMS) Find the beginning of the next track (AMS) Find the beginning of the succeeding tracks (AMS) Go backwards quickly Go forward quickly Press u u for 2 seconds or more u x*2 .once quickly*2 .repeatedly*2, *3 > once quickly*2, *3 > repeatedly*2, *3 Hold down .*2 Hold down >*2 *1 Automatic Music Sensor *2 These operations can be done during both play and pause. *3 After you have played the last track, you can return to the beginning of the first track by pressing > . Similarly, if you are at the first track, you can locate the last track by pressing .. About the display • When you press u after changing the CD or turning off and on the player, the total number of tracks in the CD and total playing time appear for about two seconds. • During play, the track number and the elapsed playing time of the current track appear. • During pause, the elapsed playing time flashes. When closing the lid of the CD player with the power supply attached While the "disc" flashes in the display, the CD starts rotating and will stop after the CD player reads the disc information. This helps to shorten the waiting time before playback starts. If the volume level does not increase Is AVLS set to "LIMIT"? Set AVLS to "NORM." For details, see "Protecting your hearing (AVLS)." About CD-Rs/CD-RWs This CD player can play CD-Rs/CD-RWs recorded in the CD-DA format*, but playback capability may vary depending on the quality of the disc and the condition of the recording device. * CD-DA is the abbreviation for Compact Disc Digital Audio. It is a recording standard used for the Audio CDs. Removing the CD Remove the CD while pressing the pivot in the center of the tray. 7