Sony D-NF400 Operating Instructions - Page 27
Presetting radio stations, 50 MHz, FM 01
UPC - 027242637597
View all Sony D-NF400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Presetting radio stations You can preset up to 51 stations (for USA and Canadian models) : 7 for TV, 4 for WB, 30 for FM and 10 for AM or 40 stations (for other models) : 30 for FM and 10 for AM. 1 Press RADIO ON/BAND to turn on the radio. 2 Press RADIO ON/BAND to select the band. 3 Press MEMORY for 2 seconds or more. The preset number will flash in the display. FM 01 87.50 MHz 4 Press DISPLAY/MENU for 2 seconds or more. The CD player starts scanning the stations from the lower frequencies and stops for about 3 seconds when a station is received. 5 If you want to preset the received station, press DISPLAY/MENU while the preset number is flashing. The received station is preset on the preset number 1 and the CD player starts scanning for the next receivable station. If you do not press DISPLAY/MENU within the 3 seconds, the CD player will start scanning for the next receivable station without storing the station. 6 Repeat step 5 until all receivable stations are preset. If the stations have already been stored, the newly preset stations will replace the old ones. Presetting stations manually 1 Press RADIO ON/BAND to turn on the radio. 2 Press RADIO ON/BAND to select the band. 3 Press and hold MEMORY until the preset number flashes in the display. FM 01 87.50 MHz From this step on, start the next operation within 30 seconds after you finished the previous operation. If 30 seconds pass with nothing done, the preset number stops flashing which shows that the CD player has exited the preset memory standby mode. If this happens, start from step 3 again. (Continued) Using the radio 27