Sony DAV-DX255 Operating Instructions - Page 18
Step 3: Positioning the System, Positioning the speakers - calibration
View all Sony DAV-DX255 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Getting Started - BASIC - Step 3: Positioning the System Positioning the speakers For the best possible surround sound, all the speakers other than the subwoofer should be the same distance from the listening position (A). However, this system allows you to place the center speaker up to 1.6 meters (5 ft) closer (B) and the surround speakers up to 5.0 meters (16 ft) closer (C) to the listening position. The front speakers can be placed from 1.0 to 7.0 meters (3 to 23 ft) (A) from the listening position. Place speakers as illustrated below. • Do not lean or hang on the speaker, as the speaker may fall down. Tip • When you change the positions of the speakers, it is recommended that you change the settings. For details, see "Getting Optimal Surround Sound for a Room" (page 66) and "Calibrating the Appropriate Settings Automatically" (page 68). Note • Do not set the speakers in an inclined position. • Do not place the speakers in locations that are: - Extremely hot or cold - Dusty or dirty - Very humid - Subject to vibrations - Subject to direct sunlight • Use caution when placing the speakers and/or speaker stands (not supplied) that are attached with the speakers on a specially treated (waxed, oiled, polished, etc.) floor, as staining or discoloration may result. • When cleaning, use a soft cloth such as a cleaning cloth for glasses. • Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine. 18GB