Sony DAV-FX100W DAVFX100W Instructions (entire component system) - Page 36
Step 8: Performing the Quick Setup, Press [ENTER] to run QUICK SETUP.]
View all Sony DAV-FX100W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Stand Troughs Step 8: Performing the Quick Setup Follow the steps below to make the minimum number of basic adjustments for using the system. To skip an adjustment, press >. To return to the previous adjustment, press .. Note • Use screws suitable for the material and strength of the wall. • Do not install the IR transmitter or IR receiver to a wall of low strength. • Sony is not liable for any damage or accident incurred by incorrect installation (i.e. low strength wall, etc.), incorrect use of this product, or natural disaster. • When connecting/disconnecting cords, detach the IR transmitter or IR receiver from the wall first. "/1 ./> X/x ENTER CLEAR With cover opened. 1 Turn on the TV. 2 Press [/1. Note • Disconnect the headphone when you perform the Quick Setup. You cannot operate steps after 8 with the headphone connected. • Make sure that the function is set to "DVD." 3 Switch the input selector on your TV so that the signal from the system appears on the TV screen. [Press [ENTER] to run QUICK SETUP.] appears at the bottom of the screen. If this message does not appear, display the Quick Setup and perform again (page 38). Note • When you press CLEAR in message, the message disappears. When you need to perform the Quick Setup, see "To recall the Quick Setup display" (page 38). 4 Press ENTER without inserting a disc. 36US