Sony DAV-HDX287WC To stabilize S-AIR reception - Page 1
Sony DAV-HDX287WC - Bravia Theater System Manual
View all Sony DAV-HDX287WC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
(1) 4-136-147-11(1) English To stabilize S-AIR reception Read the following when S-AIR reception is poor or unstable. To use S-AIR products (S-AIR main unit and sub unit) Before using S-AIR products, have the following ready. Confirm the wireless adapters are inserted correctly. Insert the wireless adapters firmly to the depth into the slots of the S-AIR main unit and sub unit respectively. Confirm that the S-AIR IDs of the S-AIR main unit and sub unit are the same. The default setting of the S-AIR IDs of the S-AIR main unit and sub unit is "A." Depending on the S-AIR product, you can set the S-AIR ID by the switch or the setup menu. For details, refer to the operating instructions of each S-AIR product. Insert firmly S-AIR ID setup menu S-AIR ID A B C S-AIR ID switch About environments where S-AIR products (S-AIR main unit and sub unit) are used S-AIR products use a radio frequency of 2.4 GHz. Certain electronic equipment or other factors may cause lost connection or instability in S-AIR reception. Electronic equipment influence The following may cause interference or cross talk. - Cellular phones, cordless phones - Wireless LAN, personal computers - Game machines using radio signals - Microwave ovens Other factors The following may cause poor reception. - Materials or structures, such as walls and floors - The location where an S-AIR product is placed When using S-AIR products, place them as far as possible from the above electronic equipment, or place where S-AIR reception is stable. ©2009 Sony Corporation Printed in China When S-AIR reception is poor Check the following. Keep cords that are connected to the S-AIR product (AC power cord (mains lead), speaker cords, or other cords) away from the wireless adapter and slot. Keep as much space as possible around S-AIR products. Avoid placing S-AIR products on top of, or directly below, other electronic equipment. Avoid placing S-AIR products in a closed rack, metal rack, or under a table. Adjust the location (height, orientation, and place in the room) of S-AIR products until reception is the most stable. Place so that the wireless adapters of the S-AIR main unit and sub unit are closer. Place so that S-AIR products are separated from other wireless devices. Place so that S-AIR products are separated from metal doors or tables. If you cannot improve S-AIR reception, change the "RF CHANGE" setting. For details, refer to the operating instructions of each S-AIR product.