Sony DAV-TZ130 Operating Instructions - Page 2

Playing a Disc 1 Press DVD/CD. You can also select this function by pressing FUNCTION repeatedly. 2 Press  to open the disc tray. 3 Place a disc on the tray, then press . Playing Files on a Disc/USB Device 1 Press DVD/CD or USB.  DVD/CD: For a disc.  USB: For a USB device. You can also select the function by pressing FUNCTION repeatedly. 2 Load the source.  For a disc Place a disc on the tray by pressing  to open/close the disc tray.  For a USB device Connect a USB device to the (USB) port. With the label side up. 4 Press  to start playback. 5 Press VOLUME +/- to adjust the volume. USB device 3 Press / to select a folder, then press and select a file. 4 Press  to start playback. 5 Press VOLUME +/- to adjust the volume. Note  Do not remove the USB device during operation. To avoid data corruption or damage to the USB device, turn the system off when connecting or removing the USB device. 17 Other Playback Operations To change angles Press ANGLE during playback to select the desired angle. To display subtitles Press SUBTITLE during playback to select the desired subtitle language. To change the sound When the system is playing a DVD VIDEO, DivX video file, or MPEG4 video file recorded in multiple audio formats (PCM, Dolby Digital, or MPEG audio), you can change the audio format. If the DVD VIDEO is recorded with multilingual tracks, you can also change the language. With a VIDEO CD or CD, you can select the sound from the right or left channel and listen to the sound of the selected channel through both the right and left speakers. Press AUDIO repeatedly during playback to select the desired audio signal. The selected audio signal format is displayed on the TV screen. To play a VIDEO CD with PBC functions When you start playing a VIDEO CD with PBC (Playback control) functions, the menu for your selection appears. To play without using PBC Press and hold SHIFT, then press the number buttons to select the item number you want in stop mode. To search for a title/chapter/ track/scene, etc.  When playing a DVD/VCD 1 Press DISPLAY during play. The Display Menu appears on the TV screen. 2 Press / to select an option, then press . 3 Press and hold SHIFT, then press the number buttons to jump to the desired option.  When playing a CD 1 Press DISPLAY during play. The selection display appears on the TV screen. 2 Press and hold SHIFT, then press the number buttons to select the desired track.  When playing an MP3/JPEG/DivX file 1 Press DISPLAY during play. The selection display appears on the TV screen. 2 Press and hold SHIFT, then press the number buttons to select the desired number. To play in programmed order Selects the tracks to play in the order you want (only for CDs). 1 Press and hold SHIFT, then press PROGRAM. The Program Menu display appears on the TV screen. 2 Press and hold SHIFT, then press the number buttons to select the desired track. 3 Press to select [Start] to play the program. 18 To play repeatedly/shuffle, etc. Press REPEAT repeatedly to select the desired playback mode. The selected mode appears in the front panel display.  "REP CHP": Repeats the current chapter.  "REP TT": Repeats the current title.  "REP ALL": Repeats all titles.  "REP TRA": Repeats the current track.  "REP OFF": The system returns to normal playback mode.  "SHUFFLE": Plays the contents once in random order until all the contents have been played.  "SHUF REP": Repeats shuffle play.  "FOLDER": Plays the current folder.  "RANDOM": Plays all files in random order.  "SINGLE": Plays the current file.  "REP ONE": Repeats the current file.  "REP FLD": Repeats the current folder. Note  The selectable modes and their order differ depending on the disc or file. Selecting the Sound Effect To select an equalizer setting Press EQ repeatedly during playback until the desired mode appears on the front panel display.  "FLAT": Flat and pure sound mode.  "CLASSIC": Ideal for listening to classical music and watching live concert DVDs.  "JAZZ": Clear mid and high range. Recreates the atmosphere of a live club with the artist just in front of you. Good for jazz music and watching dramas.  "ROCK": Enhanced low and high range for great sounding movie effects and atmosphere. Great for action movies and rock/pop music. To select a surround setting Press SURROUND repeatedly during playback to select a surround audio output mode. The selected mode appears in the front panel display.  "MULTI" (A.F.D. MULTI): When the source is 2 channel, sound is output from all speakers.  "STANDARD" (A.F.D. STANDARD): The system discriminates the sound format of the source and presents sound as it was recorded/encoded.  "DOLBY PL"(PRO LOGIC): Performs Dolby Pro Logic decoding.  "2CH ST" (2CH STEREO): All formats are downmixed to 2 channels. Note  Depending on the playback stream, the surround settings may not be effective. 19 Using a Tuner To preset radio stations You can preset 20 FM stations. You can then tune in any of those stations simply by selecting the corresponding preset number. 1 Press FM. 2 Press and hold TUNING +/- for 2 seconds to start tuning until you find the desired radio station. "SEARCH +" or "SEARCH -" appears in the front panel display until a radio station with sufficient signal strength is found. 3 Press and hold SHIFT, then press PROGRAM. "P 01" flashes in the front panel display. 4 Press and hold SHIFT, then press the number buttons to select a preset number. 5 Press to store the station frequency. To select a preset radio station 1 Press FM. 2 Press PRESET +/- to select a preset number. You can also select a preset number by pressing and holding SHIFT, then pressing the number buttons. If an FM program is noisy, you can select monaural reception. There will be no stereo effect, but reception will improve. Press AUDIO. "STEREO": Stereo reception. "MONO": Monaural reception. 20 Convenient Functions About the Control for HDMI function ("BRAVIA" Sync) You can control a TV compatible with the Control for HDMI function by connecting it to the system via an HDMI cable. Available features  One-Touch Play With one touch of ONE-TOUCH PLAY on the remote control, the system and your TV automatically turn on and the TV's input is switched to the system. Playback starts automatically.  System-Power Off When you turn the TV off by using the / button on the TV's remote control or TV / on the system's remote control, the system turns off automatically.  System Audio Control You can switch the audio output to either the TV speakers or this system's speakers via the TV's menu. Sleep timer You can set the system to turn off at a preset time, so you can fall asleep listening to music. Press and hold SHIFT, then press SLEEP. Each time you press this button, the minute display (the remaining time) changes by 10 minutes. A countdown of the last 20 seconds until the unit turns off appears in the front panel display. To check the remaining time Press and hold SHIFT and SLEEP for 3 seconds. The remaining time until the unit turns off appears in the front panel display. To cancel the sleep timer function Press and hold SHIFT, then press SLEEP repeatedly until "OFF" appears in the front panel display. To view information about the disc You can check the playing time and remaining time of the current title, chapter, or track. Press and hold SHIFT, then press TIME repeatedly. Each time you press and hold SHIFT, then press TIME while playing the disc, the displayed item changes depending on the disc. 21 Using the Setup Display You can make various adjustments to items such as picture and sound. Displayed items vary depending on the country model. The default setting is underlined. 1 Press SETUP in stop mode. The setup menu appears. 2 Press / to select one of the setup menu categories, then press . 3 Press / to select a setup item, then press  or . 4 Select the option you wish to change and press to confirm and go back to the previously selected item. 5 Press SETUP to turn off the menu. Selected category Setup categories -- -- General Setup Page TV Display 16:9 16:9 OSD Lang ENG 4:3 Letter Box Control for HDMI On 4:3 Pan Scan HDMI Audio Off Screen Saver On Last Memory On Auto Standby On Selected setting Options General Setup Page  [TV Display] [16:9]: Select this when you connect a widescreen TV or a TV with a wide mode function. [4:3 Letter Box]: Displays a wide picture with black bands on the top and bottom. [4:3 Pan Scan]: Displays a full-height picture on the entire screen, with trimmed sides.  [OSD Lang] (On-Screen Display) You can switch the display language on the TV screen.  [Control for HDMI] This function is available when you connect the system and a TV that is compatible with the Control for HDMI function via an HDMI cable. [On]: You can operate mutually between components that are connected via an HDMI cable. [Off]: Off.  [HDMI Audio] This setting is only required if you are using the HDMI OUT jack for an audio connection. [Off]: Turns off HDMI audio output. You can still enjoy sound output via the speaker system. [All]: The HDMI audio output format will be same as the audio stream being played. If the playback audio format is not supported, the audio output will be changed to PCM automatically. [PCM]: HDMI audio output will be downmixed to linear PCM (2-channel). 22  [Screen Saver] [On]: The screen saver image appears if you do not operate the system for about 15 minutes. [Off]: Off.  [Last Memory] This system recalls the point where you stopped the disc the last time it was played and resumes playback from that point the next time you insert the same disc. [On]: The system stores the resume points in memory. [Off]: The system does not store the resume points in memory. Playback restarts at the resume point only for the current disc in the unit. Note  When the resume playback memory is full, the resume playback point for the earliest disc is deleted.  [Auto Standby] [On]: Enters standby mode automatically when in stop, pause, no disc, or eject mode for more than 30 minutes. [Off]: The unit does not enter standby mode automatically. Speaker Setup Page  [Level] You can adjust the sound level of all the speakers and the subwoofer. [L]: Adjusts the sound level of left speaker. It is possible to adjust the parameter from -6.0 dB to +0.0 dB. [C]: Adjusts the sound level of center speaker. It is possible to adjust the parameter from -6.0 dB to +6.0 dB. [R]: Adjusts the sound level of right speaker. It is possible to adjust the parameter from -6.0 dB to +0.0 dB. [RS]: Adjusts the sound level of right surround speaker. It is possible to adjust the parameter from -6.0 dB to +6.0 dB. [LS]: Adjusts the sound level of left surround speaker. It is possible to adjust the parameter from -6.0 dB to +6.0 dB. [SW]: Adjusts the sound level of subwoofer. It is possible to adjust the parameter from -6.0 dB to +6.0 dB.  [Distance] If you move one of the speakers, be sure to set the parameters of the distance from the listening position to speakers. [L/R]: Adjusts the distance of the left/right speakers. It is possible to adjust the parameter from 1.0 m to 7.0 m (3 to 23 ft). [C]: Adjusts the distance of the center speaker. It is possible to adjust the parameter from (A) 1.6 m shorter than the setting of the L/R channel to (B) the same setting of the L/ R channel ({L/R-5 ft} to L/R). [Ls/Rs]: Adjusts the distance of the left/right surround speaker. It is possible to adjust the parameter from (A) 5.0 m shorter than the setting of the L/R channel to (B) the same setting of the L/R channel ({L/R-16 ft} to L/ R).  [Center Speaker] [On]: Activates the center speaker. [Off]: Deactivates the center speaker.  [Sur. Speaker] [On]: Activates the surround speakers. [Off]: Deactivates the surround speakers.  [Test Tone] The speakers will emit a test tone to set the Level. [On]: The speakers emit the test tone. [Off]: The speakers do not emit the test tone. Tip  To adjust the volume of all speakers, turn MASTER VOLUME on the unit or press VOLUME +/- on the remote control. 23  Press repeatedly to select the speaker and the desired level or distance. Video Setup Page  [HDMI Resolution] You can select the type of video signal that is output from the HDMI OUT jack. [Auto]: The system outputs the optimal video signal for the connected TV. [480p/576p]: The system outputs 720 × 480p* or 720 × 576p* video signals. [720p]: The system outputs 1280 × 720p* video signals. [1080i]: The system outputs 1920 × 1080i* video signals. [1080p]: The system outputs 1920 × 1080p* video signals. * i: interlace, p: progressive For non-US models:  [DivX VOD] []: Displays the DivX® registration code. Tip  Enter this unit's DivX registration code when you rent or purchase video from vod. divx.com/. DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be played only on the device to which they are registered. Preference Page  [TV Type] The TV type default setting varies depending on the area. [PAL]: For a PAL-system TV. [NTSC]: For an NTSC-system TV.  [Audio] Selects the preferred audio language for DVDs with multiple sound tracks.  [Subtitle] You can switch the language of the subtitles recorded on a DVD VIDEO.  [Disc Menu] You can switch the language for a disc's menu.  [Parental] You can restrict playback of DVDs that have ratings. Scenes may be blocked or replaced with different scenes. 1 Press / to select a rating level from 1 to 8 or [Off], then press . 2 Press and hold SHIFT, then press the number buttons to enter your 6-digit password.  [Default] This feature enables you to reset all the setup menu options and your personal settings to the factory defaults, except for your password for the [Password] and [Parental] items. Press to confirm the default reset. Password Setup Page  [Password] The default password is "000000." To change the password: 1 Press and hold SHIFT, then press the number buttons to enter "000000" or your last set 6-digit password in the [Old Password] section. 2 Press and hold SHIFT, then press the number buttons to enter a new 6digit password in the [New Password] section. 3 Press and hold SHIFT, then press the number buttons to enter the new 6digit password again in the [Confirm PWD] section to confirm your entry. 4 Press [OK] to exit the menu. 24 Precautions On placement  At high volume, over long periods of time, the cabinet becomes hot to the touch. This is not a malfunction. However, touching the cabinet should be avoided. Do not place the system in a confined space where ventilation is poor as this may cause overheating.  Do not install the system near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration, or shock.  Do not install the system in an inclined position. It is designed to be operated in a horizontal position only.  Do not place heavy objects on the system. On operation  If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the unit. Should this occur, the system may not operate properly. In this case, remove the disc and leave the system turned on for about half an hour until the moisture evaporates.  If anything falls into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further. On cleaning  Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine. If you have any questions or problems concerning your system, please consult your nearest Sony dealer. On cleaning discs, disc/lens cleaners  Do not use cleaning discs or disc/lens cleaners (including wet or spray types). These may cause the apparatus to malfunction. On your TV's color IMPORTANT NOTICE Caution: This system is capable of holding a still video image or on-screen display image on your television screen indefinitely. If you leave the still video image or on-screen display image displayed on your TV for an extended period of time you risk permanent damage to your television screen. Projection televisions are especially susceptible to this. On moving the system Before moving the system, make sure that there is no disc inserted, and remove the AC power cord (mains lead) from the wall outlet (mains). On handling discs  To keep the disc clean, handle the disc by its edge. Do not touch the surface.  Do not stick paper or tape on the disc.  Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature may rise considerably inside the car. On cleaning discs  Before playing, clean the disc with a cleaning cloth. Wipe the disc from the center out.  Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-static spray intended for vinyl LPs. 25 This system can only play back a standard circular disc. Using neither standard nor circular discs (e.g., card, heart, or star shape) may cause a malfunction. Do not use a disc that has a commercially available accessory attached, such as a label or ring. On heat radiation Due to the slim type of main unit design, you may feel some heat on the top of the unit. This is normal. Please consult your nearest Sony dealer if you have any questions. Troubleshooting If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Note that if service personnel changes some parts during repair, these parts may be retained. Power The power is not turned on.  Check that the AC power cord (mains lead) is connected securely. Picture There is no picture.  The video connecting cords are not connected securely.  The unit is not connected to the correct TV input jack.  The system is not selected via the video input of the TV.  Check the output method on your system. Even though you set the aspect ratio in [TV Display] of [General Setup Page], the picture does not fill the TV screen.  The aspect ratio on the disc is fixed. Color irregularity occurs on the TV screen. The system's speakers contain magnet parts, so magnetic distortion may occur. When color irregularity occurs on the TV screen, check the following items.  Install the speakers at least 0.3 meters (1.0 ft) from your TV set. 26  If the color irregularity persists, turn off the TV set once, then turn it on after 15 to 30 minutes.  Reposition the speakers farther away from your TV set. The [TV Type] setting does not match your TV. [TV Type] can be reset according to the following procedure: 1. P ress  to take out the disc. 2. Press DISPLAY. 3. Press . [TV Type] will be reset. Sound There is no sound. Severe hum or noise is heard.  The speaker cords are not connected securely.  Clean the disc. The sound loses stereo effect when you play a VIDEO CD or CD.  Set the audio setting to [Stereo] by pressing AUDIO. Operation Radio stations cannot be tuned in.  Check that the antenna (aerial) is connected securely. Adjust the antenna (aerial) or connect an external antenna (aerial) if necessary. A disc does not play.  The region code on the DVD does not match the system.  Moisture has condensed inside the unit and may cause damage to the lenses. Remove the disc and leave the unit turned on for about half an hour. A DATA CD/DATA DVD cannot be played.  The DATA CD is not recorded in ISO 9660 Level 1/Level 2, or Joliet.  The DATA DVD is not recorded in UDF (Universal Disk Format). A JPEG image file cannot be played.  It is larger than 2,048 (width) × 1,536 (height) in normal mode, or more than 2,000,000 pixels in progressive format which is mainly used on Internet Web sites. A DivX video file cannot be played.  The DivX video file is larger than 720 (width) × 576 (height). The name of a folder or file is not displayed correctly.  The system can only display numbers and letters of the alphabet. Other characters are displayed as [_]. A disc does not start playing from the beginning.  Resume Play has been selected. During stop, press  and then start playback.  Program play has been selected. During stop, press  and then start playback.  Shuffle play has been selected. During stop, press  and then start playback. A disc cannot be ejected and "LOCKED" appears in the front panel display.  Contact your Sony dealer or local authorized Sony service facility. The system does not work normally.  Disconnect the AC power cord (mains lead) from the wall outlet (mains), then reconnect after several minutes. The Control for HDMI function does not work.  Set the [Control for HDMI] setting in [General Setup Page] to [On]. 27  Make sure that the connected component is compatible with the [Control for HDMI] function.  Check the connected component's setting for the Control for HDMI function. Refer to the operating instructions supplied with the component. USB device "OVERLOAD" appears in the front panel display.  Remove the USB device from the (USB) port. Make sure there is no problem with the USB device. The USB device (audio file/JPEG image file) cannot be played.  Files that are encrypted or protected by passwords, etc., cannot be played.  There is no playable file in the USB device. 28 Specifications AUDIO POWER SPECIFICATIONS for the U.S. models POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC) Front L + Front R With 3 ohms loads, both channels driven, from 180 - 15,000 Hz; rated 23 watts per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 milli watts to rated output. Amplifier Section POWER OUTPUT (rated): Front L + Front R 32 W + 32 W (at 3 ohms, 1 kHz, 1% THD) POWER OUTPUT (reference): Front L/Front R/ Surround L/Surround R: 43 watts (per channel at 3 ohms, 1 kHz) Center: 89 watts (per channel at 6 ohms, 1 kHz) Subwoofer: 89 watts (at 6 ohms, 100 Hz) Inputs TV/CABLE : Pin jack CD/DVD System Laser Diode Properties Emission Duration: Continuous Laser Output*: Less than 1,000 μW * This output is the value measurement at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. USB Section (USB) port: Maximum current: 500 mA Tuner Section System PLL quartz-locked digital synthesizer Tuning range North American and Brazilian models: 87.5 MHz - 108.0 MHz (100 kHz step) Other models: 87.5 MHz - 108.0 MHz (50 kHz step) Antenna (aerial) terminals 75 ohms, unbalanced Intermediate frequency 10.7 MHz Video Section Outputs VIDEO: Pin jack HDMI OUT: HDMI 19-pin Speakers Front SS-TS107 Dimensions (approx.) 91 mm × 112 mm × 101 mm (3 5/8 in × 4 1/2 in × 4 in) (w/h/d) incl. projecting parts Mass (approx.) 0.4 kg (15 oz) Center SS-CT102 Dimensions (approx.) 91 mm × 112 mm × 101 mm (3 5/8 in × 4 1/2 in × 4 in) (w/h/d) incl. projecting parts Mass (approx.) 0.5 kg (1 lb 2 oz) Surround SS-TS107 Dimensions (approx.) 91 mm × 112 mm × 101 mm (3 5/8 in × 4 1/2 in × 4 in) (w/h/d) incl. projecting parts Mass (approx.) 0.4 kg (15 oz) Subwoofer SS-WS103 Dimensions (approx.) 190 mm × 345 mm × 225 mm (7 1/2 in × 13 5/8 in × 8 7/8 in) (w/h/d) incl. projecting parts Mass (approx.) 3.5 kg (7 lb 12 oz) General Power requirements North American and Mexican models: 120 V AC, 60 Hz Argentine models: 220 V - 240 V AC, 50/60 Hz Brazilian models: 127 V - 240 V AC, 50/60 Hz Latin American models: 110 V - 240 V AC, 50/60 Hz Other models: 220 V - 240 V AC, 50/60 Hz Power consumption On: 67 W Standby: