Sony DCR DVD105 Operating Guide - Page 21
Step 2: Charging the battery pack - batterie
UPC - 027242688544
View all Sony DCR DVD105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Getting Started Step 2: Charging the battery pack You can charge the battery after attaching the "InfoLITHIUM" battery pack (P series) (p.137) to your camcorder. • You cannot use an NP-FP30 battery pack with your camcorder. (See the reverse side of the battery pack for the model number.) Installing the battery pack with excess force may lead to camcorder malfunction such as deterioration in battery pack performance or difficulty in removing the battery pack. POWER switch CHG lamp DC IN jack cover DC plug Battery DC IN jack Power cord To the wall outlet AC Adaptor 1 Slide the battery pack in the direction of the arrow until it clicks. 2 Slide the POWER switch in the direction of the arrow to set it to OFF (CHG) (The default setting). 3 Connect the AC Adaptor to the DC IN jack on your camcorder. Open the DC IN jack cover to connect the AC Adaptor. DC IN jack cover Match the v mark on the DC plug with v mark on your camcorder. 4 Connect the power cord to the AC Adaptor and the wall outlet. The CHG (charge) lamp lights up and charging starts. 21