Sony DCR TRV330 Operating Instructions - Page 52
Inserting a scene
UPC - 027242584174
View all Sony DCR TRV330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Inserting a scene You can insert a scene in the middle of a recorded tape by setting the start and end points. The previously recorded frames between these start and end points will be erased. Use the Remote Commander for this operation. [a] [b] (1) While your camcorder is in the standby mode, keep pressing EDITSEARCH, and release the button at the insert end point [b]. (2) Press ZERO SET MEMORY. The ZERO SET MEMORY indicator flashes and the counter resets to zero. (3) Keep pressing the - 7 side of EDITSEARCH and release the button at the insert start point [a]. (4) Press START/STOP to start recording. The scene is inserted. Recording stops automatically near the counter zero point. Your camcorder returns to the standby mode. ZERO SET MEMORY EDITSEARCH Notes •The zero set memory function works only for tapes recorded in the Digital8 system. •The picture and the sound may be distorted at the end of the inserted section when it is played back. If a tape has a blank portion in the recorded portions The zero set memory function may not work correctly. 52