Sony DCRTRV19 Operating Instructions - Page 114

Recording still images on "Memory Stick" - Memory Photo recording The POWER switch should be set to . (1) Keep pressing PHOTO lightly and check the image. The green z indicator stops flashing, then lights up. The brightness of the image and the focus are adjusted and fixed while your camcorder targets at the center of the image. Recording does not start yet. (2) Press PHOTO deeply. Recording is complete when the bar scroll indicator disappears. The image displayed on the screen when you pressed PHOTO deeply will be recorded on the "Memory Stick." 1 50min 640 FINE 12 [a] 101 [b] 2 50min 640 FINE 101 [a] Approximate number of images that can be recorded on the "Memory Stick"* [b]Folder name to be recorded in Note The recordable number of the images indicated on the screen depends on the setting of the image quality and the condition of the subject being recorded. Therefore, the recordable number may not change even after recording has been done. You can record still images on the "Memory Stick" during tape recording or tape recording standby See page 46 for details. * The indication of the number of recordable still images Depending on the image quality setting and the complexity of the subject, the indication of the remaining number of recordable still images may not change even after you record an image. When the remaining number is greater than 9999, the >9999 indication appears on the screen. 114