Sony DMX-NV1 Operating Instructions - Page 22
Lightly push the receiver down so that both Mounting Knobs are locked, into place.
UPC - 027242715110
View all Sony DMX-NV1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Getting Started The bottom Mounting Knob is threaded in the hole while the top Mounting Knob sits on the groove. 4 Lightly push the receiver down so that both Mounting Knobs are locked into place. Make sure that cables are organized with the Cable Cover so that the cables hang out on the same side as the Mounting Knobs and on the front side of the receiver. If difficult to mount the receiver, remove the TOP Mounting Knob. Reposition the receiver to the bracket then tighten with the Mounting Knob to keep in place. 22
Getting Started
22
The
b
ottom Mounting Kno
b
is threaded in the hole while the top Mounting Kno
b
sits on
the groove.
4
Lightly push the receiver down so that both Mounting Knobs are locked
into place.
Make sure that ca
b
les are organized with the Ca
b
le Cover so that the
ca
b
les hang out on the same side as the Mounting Kno
b
s and on the
front side of the receiver.
If difficult to mount the receiver, remove the TOP Mounting Kno
b
.
Reposition the receiver to the
b
racket then tighten with the Mounting
Kno
b
to keep in place.