Sony DSLR-A700P Read This First - Page 7
To remove the lens, Keep dust from getting inside the camera when changing lenses, User's Guide
View all Sony DSLR-A700P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
To remove the lens Press the lens release button all the way in and turn the lens counterclockwise until it stops. Lens release button • Replace the cap on the lens and attach the body cap (or another lens) to the camera after removing the lens. Keep dust from getting inside the camera when changing lenses! If dust or debris gets inside the camera and lands on the surface of the image sensor (the part that acts as the film), it may appear on the image, depending on the shooting environment. The camera is equipped with an anti-dust function to prevent dust from landing on the image sensor. However, take note of the following reminders when attaching/removing a lens. • Avoid changing lenses in a dusty location. • When storing the camera, always attach a lens or the body cap. • When attaching the body cap, remove all the dust from the cap before placing it on the camera. If dust or debris gets inside the camera, select [Cleaning mode] in the Setup menu, and use a commercially available blower brush to clean the image sensor. t "User's Guide/ Troubleshooting" (page 125) 7