Sony DVP-F41MS Operating Instructions - Page 38

Playing Discs Playing Discs When playing a disc, make sure that the MS indicator is turned off (Disc mode). To play a DATA-CD, see page 67. Depending on the DVD or VIDEO CD, some operations may be different or restricted. Refer to the operating instructions supplied with your disc. MS button/indicator ?/1 button/indicator xN MS AUDIO ?/1 H x 1 Turn on your TV. 2 Switch the input selector on the TV to the player. When using an amplifier (receiver) Turn on the amplifier (receiver) and select the appropriate channel. 3 Press ?/1. 38 The ?/1 indicator (red) changes to green and the front panel display lights up. 4 Insert a disc in the player. If the MS indicator on the player is lit, press MS to turn it off in stop mode. (Disc mode) MS button/ indicator With the playback side facing down 5 Press N on the player or H on the remote. The player starts playback (continuous play). Adjust the volume on the TV or the amplifier (receiver). After following Step 5 Depending on the disc, a menu may appear on the TV screen. You can play the disc interactively by following the instructions on the menu. DVD (page 41), VIDEO CD (page 42). To turn off the player Press ?/1. The player enters standby mode and the ?/1 indicator lights up in red. To turn off the player completely, disconnect the AC power cord. While playing a disc, do not disconnect the AC power cord. Doing so may cancel the menu settings. When you turn off the player, first press x to stop playback and then press ?/1. Notes on playing DTS sound tracks on a CD • When playing DTS-encoded CDs, excessive noise will be heard from the