Sony DVP-NC555ES Operating Instructions - Page 28
Press ENTER., jack if any you are using
View all Sony DVP-NC555ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
6 Press ENTER. The Setup Display for selecting the aspect ratio of the TV to be connected appears. SCREEN SETUP TV TYPE: 4:3 LETTER BOX SCREEN SAVER: 4:3 LETTER BOX BACKGROUND: 4:3 PAN SCAN BLACK LEVEL: 16:9 BLACK LEVEL (COMPONENT OUT): ON COMPONENT OUT: INTERLACE 4:3 OUTPUT: FULL 7 Press X/x to select the setting that matches your TV type. ◆ If you have a 4:3 standard TV • 4:3 LETTER BOX or 4:3 PAN SCAN (page 71) ◆ If you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode • 16:9 (page 71) 8 Press ENTER. The Setup Display for selecting the type of video signal appears. SCREEN SETUP TV TYPE: 4:3 LETTER BOX SCREEN SAVER: ON BACKGROUND: JACKET PICTURE BLACK LEVEL: ON BLACK LEVEL (COMPONENT OUT): ON COMPONENT OUT: INTERLACE 4:3 OUTPUT: INTERLACE PROGRESSIVE 9 Press X/x to select the type of signals you wish to output to your TV. Select "PROGRESSIVE" only if you have made video pattern C (page 18) and wish to view progressive video signals. ◆ Interlace format TV (standard TV) • INTERLACE (pages 72) ◆ Progressive format TV • PROGRESSIVE (pages 72) 10Press ENTER. The Setup Display for selecting the type of jack used to connect your amplifier (receiver) appears. Is this player connected to an amplifier (receiver)? Select the type of jack you are using. YES AUDIO OUTPUT L/R DIGITAL OUTPUT DIGITAL & 5.1CH OUTPUT NO 11Press X/x to select the type of jack (if any) you are using to connect to an amplifier (receiver), then press ENTER. Choose the item that matches the audio connection you selected on pages 22 to 25 ( A through D ). A • If you connect just a TV and nothing else, select "NO." Quick Setup is finished and connections are complete. B-1 C-1 • Select "AUDIO OUTPUT L/R." Quick Setup is finished and connections are complete. B-2 C-2 D-2 • Select "DIGITAL OUTPUT." The Setup Display for "DOLBY DIGITAL" appears. D-1 or both D-1 and D-2 • Select "DIGITAL & 5.1CH OUTPUT." The Setup Display for "DOLBY DIGITAL" appears. 12Press X/x to select the type of Dolby Digital signal you wish to send to your amplifier (receiver). Choose the signal that matches the audio connection you selected on pages 23 to 25 ( B through D ). AUDIO SETUP AUDIO ATT: OFF AUDIO DRC: STANDARD AUDIO FILTER: SHARP DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON DOLBY DIGITAL: D-PCM DTS: D-PCM 48kHz/96kHz PCM: DOLBY DIGITAL 28