Sony DVP-NC85H Operating Instructions - Page 23
Connecting to audio L/R input, jacks, Connecting to a digital audio, input jack, TV: Dynamic Theater
UPC - 027242689961
View all Sony DVP-NC85H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Hookups A Connecting to audio L/R input jacks This connection will use your TV's or stereo amplifier's (receiver's) two speakers for sound. Connect using the audio/video cord (supplied). Yellow White (L) Red (R) Yellow White (L) Red (R) • Surround effect (page 45) TV: Dynamic Theater, Dynamic, Wide, Night B Connecting to a digital audio input jack If your AV amplifier (receiver) has a Dolby Digital*1 or DTS*2 decoder and a digital input jack, use this connection. Connect using a coaxial or optical digital cord/HDMI cord (not supplied). Coaxial cord Optical cord HDMI cord • Surround effect Dolby Digital (5.1ch), DTS (5.1ch) Stereo amplifier (receiver): Standard, Night *1 Manufactured under license from Dolby Laboratories. "Dolby," "Pro Logic," and the double-D symbol are trademarks of Dolby Laboratories. *2 "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc. Notes • After you have completed the connection, be sure to set "DOLBY DIGITAL" to "DOLBY DIGITAL" and "DTS" to "ON" in Quick Setup (page 24). • When you connect an amplifier (receiver) that conforms to the 96 kHz sampling frequency, set "48kHz/96kHz PCM" in "AUDIO SETUP" to "96kHz/24bit" (page 70). • The TVS effects of this player cannot be used with this connection. • When you connect the player to an AV amplifier (receiver) using an HDMI cord, you will need to do one of the following: - Connect the AV amplifier (receiver) to the TV with the HDMI cord. - Connect the player to the TV with a video cord other than HDMI cord (component video cord, S VIDEO cord, or audio/video cord). • When connecting to the HDMI OUT jack, carefully align the HDMI connector with the jack. Do not bend and apply pressure to the HDMI cord. ,continued 23