Sony DVP-NS611HP Operating Instructions - Page 16
Press ENTER., an audio component, then press
UPC - 027242757660
View all Sony DVP-NS611HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
6 Press X/x to select the setting that matches your TV type. ◆ If you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode • 16:9 (page 31) ◆ If you have a 4:3 standard TV • 4:3 LETTER BOX or 4:3 PAN SCAN (page 31) 7 Press ENTER. The Setup Display for selecting the type of jack used to connect your audio component appears. Is this player connected to an amplifier (receiver) ? Select the type of jack you are using. YES LINE OUTPUT L/R (AUDIO) DIGITAL OUTPUT NO 8 Press X/x to select the type of jack (if any) you are using to connect to an audio component, then press ENTER. Select "NO," if you do not connect an audio component, then go to step 12. Select "YES: LINE OUTPUT L/R (AUDIO)," if you connect an audio component using an audio cord, then go to step 12. Select "YES: DIGITAL OUTPUT," if you connect an audio component using a digital coaxial/HDMI cord. 9 Press X/x to select the type of Dolby Digital signal to your audio component. If your audio component has a Dolby Digital decoder, select "DOLBY DIGITAL." Otherwise, select "D-PCM." AUDIO SETUP AUDIO DRC: STANDARD DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON DOLBY DIGITAL: DOLBY DIGITAL DTS: DOLBY DIGITAL 48kHz/96kHz PCM: D-PCM 10Press ENTER. "DTS" is selected. AUDIO SETUP AUDIO DRC: STANDARD DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON DOLBY DIGITAL: DOLBY DIGITAL DTS: OFF 48kHz/96kHz PCM: OFF ON 11Press X/x to select whether or not to send a DTS signal to your audio component. If your audio component has a DTS decoder, select "ON." Otherwise, select "OFF." 12Press ENTER. Quick Setup is finished and connections are complete. b When "PhotoTV HD" mode is activated (page 28), the selection for "TV TYPE" is skipped. 16US