Sony DVP NS725P Operating Instructions - Page 57
Controlling Your TV with the Supplied Remote, Controlling other TVs with the, remote - new remote for
UPC - 027242622463
View all Sony DVP NS725P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Controlling Your TV with the Supplied Remote You can control the sound level, input source, and power switch of your Sony TV with the supplied remote. TV Number buttons VOL TV/VIDEO Controlling other TVs with the remote You can control the sound level, input source, and power switch of non-Sony TVs as well. If your TV is listed in the table below, set the appropriate manufacturer's code. 1 While holding down TV [/1, press the number buttons to select your TV's manufacturer's code (see the table below). 2 Release TV [/1. You can control your TV using the buttons below. By pressing TV [/1 VOL +/- TV/VIDEO You can Turn the TV on or off Adjust the volume of the TV Switch the TV's input source between the TV and other input sources. Notes Depending on the unit being connected, you may not be able to control your TV using some of the buttons. Code numbers of controllable TVs Manufacturer Sony (default) JVC Panasonic Philips RCA Samsung Sanyo Sharp Toshiba Zenith Code number 01 09 19 21 10 20 11 18 07 15 Notes • If you enter a new code number, the code number previously entered will be erased. • When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again. Using Various Additional Functions 57