Sony DVP-S363 Operating Instructions (CD/DVD Component) - Page 59

Additional Information Specifications CD/DVD player Laser Semiconductor laser Signal format system NTSC Audio characteristics Frequency response DVD (PCM 96 kHz): 2 Hz to 44 kHz (±1 dB)* DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB) CD: 2 Hz to 20 kHz (±0.5 dB) Signal-to-noise ratio More than 110 dB (AUDIO OUT connectors only) Harmonic distortion Less than 0.003 % Dynamic range More than 100 dB (DVD) More than 97 dB (CD) Wow and flutter Less than detected value (±0.001 % W PEAK) Outputs Jack Output type level Load impedance AUDIO OUT Phono (1, 2) jacks 2 Vrms Over 10 kilohms (at 50 kilohms) DIGITAL OUT Optical -18 dBm (OPTICAL) output connector Wave length: 660 nm DIGITAL OUT Phono (COAXIAL) jack 0.5 Vp-p 75 ohms terminated VIDEO OUT (1, 2) Phono jack 1.0 Vp-p 75 ohms, sync negative S VIDEO OUT 4-pin Y: 1.0 Vp-p 75 ohms, (1, 2) mini DIN sync negative C: 0.286 Vp-p 75 ohms terminated COMPONENT VIDEO OUT (Y, PB/B-Y, PR/R-Y) Phono jacks Y: 1.0 Vp-p PB/B-Y, PR/R-Y: 0.7 Vp-p 75 ohms, sync negative 75 ohms General Power requirements DVP-S360/DVP-S363 120 V AC, 60 Hz DVP-S365 110-240 V AC, 50/60 Hz Power consumption DVP-S360/DVP-S363 13 W DVP-S365 14 W Dimensions (approx.) 430 × 69 × 252 mm (17 × 2 3⁄4 × 10 in.) (w/h/d) incl. projecting parts Mass (approx.) 2.8 kg (6 lb 3 oz) Operating temperature 41 ˚F to 95 ˚F (5 ˚C to 35 ˚C) Operating humidity 25 % to 80 % Supplied accessories See page 7. * The signals from AUDIO OUT connectors are measured. When you play PCM sound tracks with a 96 kHz sampling frequency, the output signals from the DIGITAL OUT (OPTICAL, COAXIAL) are converted to 48 kHz (sampling frequency). Design and specifications are subject to change without notice. ENERGY STARR is a U.S. registered mark. As an ENERGY STARR Partner, Sony Corporation has determined that this product meets the ENERGY STARR guidelines for energy efficiency. 59