Sony DVP-SR510H Reference Guide - Page 8
AUDIO SETUP, HDMI SETUP, DVD VIDEOs/VIDEO CDs. If you start - manual
View all Sony DVP-SR510H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
MULTI-DISC RESUME: Switches the Multidisc Resume setting on or off. Resume playback can be stored in memory for up to 6 different DVD VIDEOs/VIDEO CDs. If you start the settings again, the resume point is cleared. (DVD VIDEO/VIDEO CD only) AUDIO SETUP AUDIO DRC (Dynamic Range Control)*2: Set according the surrounding environment. Set to "TV MODE" when the smallest sounds are indiscernible, or set to "WIDE RANGE" when the listening environment is good, for example, in a home movie theater. DOWNMIX*2: Switches the method for mixing down to 2 channels when you play a DVD which has rear sound elements (channels), or is recorded in Dolby Digital format. Normally select "DOLBY SURROUND." DIGITAL OUT: Selects if audio signals are output via the DIGITAL OUT (COAXIAL)/ HDMI OUT jack. When you select "ON," set also the following "DOLBY DIGITAL," "DTS," or "48kHz/96kHz PCM." DOLBY DIGITAL: Selects the type of Dolby Digital signal. Set to "D-PCM" when the player is connected to an audio component without a built-in Dolby Digital decoder. DTS: Selects the type of DTS audio signal. Set to "ON" when you play a DVD VIDEO with DTS sound tracks. Do not set to "ON" when you connect the player to an audio component without a DTS decoder. 48kHz/96kHz PCM: Selects the sampling frequency of the digital audio output signal. (DVD VIDEO only) HDMI SETUP You can adjust items related to HDMI connection. HDMI RESOLUTION*3: Selects the type of video signal output from the HDMI OUT jack. If "AUTO (1920×1080p)" (default) is selected, the player outputs video signals of the highest resolution acceptable for your TV. If the picture is not clear, unnatural or otherwise not to your satisfaction, try another option that suits the disc, TV/projector, etc. For details, refer also to the instruction manual supplied with the TV/ projector, etc. You cannot select this when "JPEG RESOLUTION" is set to "PhotoTV HD." JPEG RESOLUTION: Selects the type of JPEG resolution so that you can enjoy a high picture quality via HDMI connection. This setting is effective only when you set "TV TYPE" to "16:9." You cannot select this when "HDMI RESOLUTION" is set to "720×480p." "(1920×1080i) HD " and "(1920×1080i) HD" are effective only when you set "HDMI RESOLUTION" to "1920×1080i." If you set this setting to "PhotoTV HD," "(1920×1080i) HD " or "(1920×1080i) HD," the effect, rotation, and zoom functions are not available. YCBCR/RGB (HDMI): Selects the type of HDMI signal output from the HDMI OUT jack. Set to "RGB" if the playback picture is distorted. You cannot select this when "JPEG RESOLUTION" is set to "PhotoTV HD." AUDIO (HDMI): Selects the type of audio signal output from the HDMI OUT jack. Set to "PCM" if you connect the player to a TV that is not compatible with DOLBY DIGITAL/DTS signals. *1 When you select "OTHERS t," select and enter a language code. See "LANGUAGE CODE LIST" at the end of this manual. *2 This function affects the output from the following jacks: - LINE OUT L/R (AUDIO) jacks. - DIGITAL OUT (COAXIAL)/HDMI OUT jack only when "DOLBY DIGITAL" is set to "D-PCM." *3 If the picture does not appear normally or goes blank, reset the setting. Press [/1 to turn off, enter "369," and then press [/1 to turn on the player again. 8