Sony DVPNS36B Operating Instructions - Page 60

Controlling Your TV With the Supplied Remote You can control the sound level, input source, and power switch of your Sony TV with the supplied remote. TV Number buttons 2 +/- t Controlling other TVs with the remote You can control the sound level, input source, and power switch of non-Sony TVs as well. If your TV is listed in the table below, set the appropriate manufacturer's code. 1 While holding down TV [/1, press the number buttons to select your TV's manufacturer's code (see the table below). 2 Release TV [/1. You can control your TV using the buttons below. By pressing You can TV [/1 Turn the TV on or off 2 (volume) +/- Adjust the volume of the TV t (TV/video) Switch the TV's input source between the TV and other input sources Note Depending on the connected unit, you may not be able to control your TV using all or some of the buttons on the supplied remote. Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. Manufacturer Sony Aiwa Grundig Hitachi JVC LG Loewe Panasonic Philips Samsung Sanyo Sharp Thomson Toshiba Code number 01 (default) 01 (default) 11 24 33 06 06 17, 49 06, 08 06, 71 25 29 43 38 Notes • When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again. • Depending on the unit being connected, you may not be able to control your TV using all or some of the buttons on the supplied remote. 60