Sony DVPNS90V Operating Instructions - Page 75
L1 - Settings for the Speakers (SPEAKER SETUP), Select DVD or SUPER AUDIO
UPC - 027242667624
View all Sony DVPNS90V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Note If the HDMI OUT jack is connected to equipment not compatible with DOLBY DIGITAL signals, the "D-PCM" signals will be automatically output even when you select "DOLBY DIGITAL." ◆ DTS Select the type of DTS audio signals. D-PCM DTS Select this when the player is connected to an audio component without a built-in DTS decoder. Select this when the player is connected to an audio component with a built-in DTS decoder. Note If the HDMI OUT jack is connected to equipment not compatible with DTS signals, the "D-PCM" signals will be automatically output even when you select "DTS." ◆ 48kHz/96kHz PCM (DVD VIDEO only) Selects the sampling frequency of the audio signal. 48kHz/16bit The audio signals of DVD VIDEOs are always converted to 48kHz/16bit. 96kHz/24bit All types of signals including 96kHz/24bit are output in their original format. However, if the signal is encrypted for copyright protection purposes, the signal is only output as 48kHz/16bit. Notes • The analogue audio signals from the LINE OUT L/R (AUDIO) jacks and 5.1CH OUTPUT jacks are not affected by this setting and keep their original sampling frequency level. • If the HDMI OUT jack is connected to equipment not compatible with 96 kHz/24 bit signals, 48 kHz/16 bit PCM will be automatically output even when you select "96kHz/24bit." Settings for the Speakers (SPEAKER SETUP) To obtain the best possible surround sound, set the size of the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the volume of the speakers to the same level. This setting is effective when connecting the speaker with 5.1 CH OUTPUT jacks (page 23). You can create two different Speaker Setup settings, one for Super Audio CDs and one for all other types of discs. 1 Follow steps 1 through 4 of "Using the Setup Display" (page 68) to select "SPEAKER SETUP" in the Setup display. SPEAKER SETUP DVD: SUPER AUDIO CD: 2 Select "DVD" or "SUPER AUDIO CD" using X/x, then press ENTER. Example: "DVD" SPEAKER SETUP(DVD) SIZE: DISTANCE: LEVEL(FRONT): LEVEL(REAR): TEST TONE: OFF FRONT: CENTER: REAR: SUBWOOFER: LARGE LARGE LARGE(REAR) YES 3T t th ENTER Set the following items in the order that they are explained below. The default settings are underlined. Settings and Adjustments ,continued 75