Sony DVWM2000 Product Manual (Operation Manual 1st Edition (Revised 6)) - Page 126
Item number, Settings, In 525-line mode, DECEL, ACCEL, 1F/2F, ACCUR, ROUGH, STILL, NEG&E
View all Sony DVWM2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Chapter 12 Setup Menus 12-4 Items in the Extended Setup Menu Menu items in the range 300 to 399, relating to editing operations Item number Item name Settings 301 VAR SPEED RANGE FOR Select the playback speed range when carrying out playback in variable speed SYNCHRONIZATION mode from a remote control unit connected to the REMOTE 1-IN(9P) connector or REMOTE 1-OUT (9P) connector. -1~+3 : For MPEG IMX tapes, analog tapes, and Digital Betacam tapes, from -1 to +3 times normal speed; for Betacam SX tapes, -1 to +2 times normal speed. ~3.45: For MPEG IMX tapes, analog tapes, and Digital Betacam tapes, from -1 to +3.45 times normal speed; for Betacam SX tapes, -1.5 to +2.3 times normal speed. WIDE : Undefined 302 CAPSTAN RE-LOCKING In 525-line mode DIRECTION When the function menu item CAPSTN is set to 4F, select whether the capstan servo should lock by accelerating or decelerating. DECEL : Lock by decelerating. ACCEL: Lock by accelerating. In 625-line mode When the function menu item CAPSTN is set to 4F or 8F, select whether the capstan servo should lock by accelerating or decelerating. DECEL : Lock by decelerating. ACCEL : Lock by accelerating. 304 EDIT FIELD SELECT Select with which fields to start and end editing using tape. 1F : Start editing with field 1 and end with field 2. 2F: Start editing with field 2 and end with field 1. 1F/2F: Start and end editing depending on the timing of command reception. 305 SYNC GRADE When editing in phase-synchronized mode with menu item 004 set to ON, select the target phase synchronization accuracy. ACCUR : ±0 frame accuracy ROUGH: ±1 frame accuracy 306 DMC INITIAL SPEED Select the initial speed automatically set when carrying out DMC editing. MANU : The speed determined by the rotation of the search dial PLAY: Normal playback speed STILL: Stationary ±0.03 to ±1, +2: Speed set in the range ±0.03 to +2 (select from +2, ±1, ±0.5, ±0.2, ±0.1, ±0.03) Note If you want to carry out DMC editing after setting this menu item, first press the DMC EDIT and DELETE buttons simultaneously to turn off the DMC EDIT button. 307 AUTO-DELETION FOR Select what happens when an erroneous edit point is set. INCONSISTENT DATA MANU : A warning is given by flashing the DELETE button on the lower control panel. The operator must manually delete the unnecessary edit points or correct the erroneous edit point. NEG&E: When inconsistent edit points are set, such as when an OUT point is before an IN point, or an audio OUT point is before an audio IN point, or when too many edit points are specified, the previously set edit point is deleted. NEG: When inconsistent edit points are set, such as when an OUT point is before an IN point, or an audio OUT point is before an audio IN point, the previously set edit point is deleted. When too many edit points are specified, the DELETE button on the control panel flashes to give a warning. Note Pressing the button corresponding to an edit point to be deleted and the DELETE button simultaneously, deletes the edit point. If an erroneous edit point is set (the DELETE button is flashing), editing is not executed. (Continued) 12-12 Chapter 12 Setup Menus