Sony FCBEX45MCC Product Brochure (FCB-EX45MC/45MCC Brochure) - Page 2

SPECIFICATIONS Image sensor Number of effective pixels (H x V) Signal system Lens Digital zoom Angle of view (H) Minimum working distance Sync system Minimum illumination S/N ratio Horizontal resolution Electronic shutter Gain AE control EV compensation Backlight compensation Privacy zone masking On screen display Flicker cancel Focusing system Picture effects Camera operation switch Video output Camera control interface Storage temperature Operating temperature Power consumption Weight Dimensions FCB-EX45MC FCB-EX45MCC 1/4 type EXview HAD CCD 768 x 494 752 x 582 EIA CCIR 18x zoom f=4.1 mm (wide) to 73.8 mm (tele), F1.4 to F3.0 12x (216x with optical zoom) 48° (wide end) to 2.7° (tele end) 35 mm (wide end), 800 mm (tele end) Internal/External (V-Lock) Less than 0.01 lx at 1/60 s (50 IRE) Less than 0.01 lx at 1/50 s (50 IRE) More than 50 dB 520 TV lines 1/60 to 1/10000 s, 16 steps 1/50 to 1/10000 s, 16 steps Auto/Manual (-3 to 28 dB, 2 dB steps) Auto, Manual, Priority mode, Bright, EV compensation, Back-light compensation -10.5 to +10.5 dB (1.5 dB steps) On/Off On/Off Title, Privacy Zone Block Auto - Auto (Sensitivity: H, L), One-Push AF, Manual, Infinity, Interval AF, Zoom Trigger AF Nega art Zoom tele, Zoom wide VS: 1.0 Vp-p (sync negative) VISCA Protocol (TTL signal level) -4°F to 140°F (-20°C to 60°C) 32°F to 122°F (0°C to 50°C) 6 to 12 V DC/1.5 W (typical) (motors inactive), Less than 2.2 W (typical) (motors active) Approx. 8.1 oz (230 g) 2 x 2 3/8 x 3 1/2 inches (50 x 57.5 x 88.5 mm) * The initial factory setting for the SMART Lens Control function is "OFF". When the function is turned OFF and the unit is used continuously for more than 24 hours, lens system initialization is recommended every 24 hours to extend the life of the lens. The "Initialize Lens" command takes a little less than 3 seconds to initialize the focus and zoom. When the Smart Lens Control function is turned ON, lens initialization is not required. DIMENSIONS 20 ± 0.1 20 ± 0.1 5 (27.5) 50 25 (25) 25.4 ± 0.1 21 ± 0.1 10 15 20 ± 0.1 7-M2 Depth 2mm or less 88.5 10 48.3 ± 0.1 5 39.8 CN901 DD901 CN904 CN051 CN902 4-M2 Depth 3mm or less 53 73 ± 0.1 8-M2 Depth 3mm or less 14 ± 0.1 CN991 CN992 Tripod Screw, Depth 7mm or less (1/4-20UNC) CN101 CN001 CN903 14 ± 0.1 4.5 85.2 CN701 CN702 CN401 CN601 2-M2 Depth 3mm or less CN301 30 CN703 PIN ASSIGNMENT CN992 Pin No. Name 1 RxD 2 TxD 3 GND (for RxD & TxD) 4 DC IN 5 GND (for DC IN) 6 VS OUT 7 GND (for VBS OUT) 8 V LOCK PULSE 9 GND (VL PULSE) Level CMOS 5.0 V (low: max. 0.8 V, high: min. 2.0 V) CMOS 5.0 V (low: max. 0.1 V, high: min. 4.4 V) 9.0 V ± 3.0 V 1.0 V ± 0.2 V External VD-Lock Pulse (EX.FV: Negative, 3.0 Vp-p 50% duty) Connector: ELCO 00 6200 509 13000 27 ± 0.1 16 ± 0.1 CN992 36 29 ± 0.1 40.2 33 ± 0.1 Unit: mm 57.5 Sony Electronics Inc. 1 Sony Drive Park Ridge, NJ 07656 (201) 930-7000 www.sony.com/videocameras IS-1194 MK10309V1 ©2005 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Design, features and specifications are subject to change without notice. All non-metric weights and measures are approximate. Sony is a registered trademark of Sony. EXview HAD CCD and VISCA are trademarks of Sony. Printed in USA (11/05)