Sony FS-85USB Operating Instructions - Page 2
Using the Foot Control Unit
UPC - 027242620209
View all Sony FS-85USB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
English Before operating the unit, please read this manual thoroughly and retain it for future reference. This Foot Control Unit is designed to be used with a personal computer equipped with a USB port. Install the supplied Digital Voice Editor on your computer's hard disk. Using the Foot Control Unit (See the illustration below) 1 Start the Digital Voice Editor. 2 Select [Options] from the [Tool] menu, click the [Transcribing Key] tab, and check the settings of the [Enable Transcribing Keys] items. Make sure that they are as follows: [Playback]: F10 [Stop]: F11 [Skip Forward]: Ctrl + Right [Skip Backward]: Ctrl + Left (Once you make the settings, you don't have to set them again.) 3 Connect the USB connector of the Foot Control Unit to the USB port of the personal computer. Note on using Windows® 98 When you connect the Foot Control Unit to the computer for the first time, the [Add New Hardware Wizard] message appears. In this case, follow the displayed instructions. 4 Push down on the right side of the pedal with your foot and keep it depressed to listen to recorded material. Operation Listen Easy Search (Skip backward)* Easy Search (Skip forward)* Stop Foot position on the pedal Right side Left side Center top Release the pedal * When you keep the pedal depressed, the operation functions as fast forward or backward. Skipping forward or backward You can specify the length of time in seconds to skip forward or backward in the message using the Easy Search function. Select [Options] from the [Tool] menu, click the [Playback Options] tab, and select the number of seconds to skip forward or backward. Initial settings are as follows: [Skip Forward]: 10 seconds [Skip Backward]: 3 seconds Troubleshooting The Foot Control Unit does not operate. • Use a computer which supports the CPU specifications recommended in "System Requirements". • Check to make sure the settings of the [Enable Transcribing Keys] items as described in step 2 in "Using the Foot Control Unit" have been made. • Do not disconnect the USB cable while the Digital Voice Editor is starting up. If you do, restart the computer. The message does not stop during an Easy Search even if you release the pedal. • Open the Control Panel of Windows, select [Keyboard], click the [Speed] tab, and select [Slow] for [Repeat rate]. You cannot use the shortcut keys of the application which you are using with the Digital Voice Editor. • Change the settings for the shortcut keys on the display of the application which you are using with the Digital Voice Editor. There is no sound. • Adjust the speaker volume on the application display, or adjust the volume control of the computer. Specifications Dimensions (w/h/d) Approx. 192 × 51 × 121 mm ( (7 5⁄8 × 2 1⁄8 × 4 7⁄8 inches) not incl. cord Mass Approx. 510 g (18 oz) Supplied accessories Digital Voice Editor (CD-ROM) (1) Earphones (1) Design and specifications are subject to change without notice. Application to be installed Digital Voice Editor* * You cannot use Digital Voice Editor, ver. IX. System Requirements Your computer and system software must meet the following minimum requirements. • IBM PC/AT or compatible - CPU: 266MHz Pentium II processor or higher (450MHz Pentium III processor of higher recomended) - RAM: 64MB or more - Hard disk space: 70MB or more - CD-ROM drive - USB port - Sound board - Display: High color (16 bit) or more and 800 x 480 pixels or more • OS: Microsoft® Windows XP Professional/Windows XP Home Edition/Windows 2000 Professional/Windows Millennium Edition/Windows 98/98 Second Edition (standard installation) Deutsch Lesen Sie diese Anleitung vor Inbetriebnahme des Geräts bitte genau durch und bewahren Sie sie zum späteren Nachschlagen sorgfältig auf. Dieser Fußschalter ist für PCs mit USB-Anschluss konzipiert. Die mitgelieferte Software „Digital Voice Editor" muss auf der Festplatte des Computers installiert werden. Verwenden des Fußschalters (siehe Abbildung unten) 1 Starten Sie die Software „Digital Voice Editor". 2 Wählen Sie [Options] im Menü [Tool], klicken Sie auf die Registerkarte [Transcribing Key] und überprüfen Sie die Einstellungen für die Optionen unter [Enable Transcribing Keys]. Stellen Sie sicher, dass folgende Tastenbelegungen eingestellt sind: [Playback]: F10 [Stop]: F11 [Skip Forward]: Strg + Rechts [Skip Backward]: Strg + Links Diese Einstellungen brauchen Sie nur einmal vorzunehmen. 3 Verbinden Sie den USB-Anschluss des Fußschalters mit dem USB-Anschluss am PC. Hinweis zu Windows® 98 Wenn Sie den Fußschalter zum ersten Mal an den Computer anschließen, wird möglicherweise das Dialogfeld [Add New Hardware Wizard] angezeigt. Gehen Sie in diesem Fall nach den Anweisungen am Bildschirm vor. 4 Betätigen Sie die reche Seite des Pedals mit dem Fuß, um eine Aufzeichnung wiederzugeben. Funktion Wiedergabe Schnelles Suchen (Zurückschalten)* Schnelles Suchen (Weiterschalten)* Stoppen Fußposition auf dem Pedal Rechte Seite Linke Seite Mitte oben Nehmen Sie den Fuß vom Pedal. * Wenn Sie das Pedal länger betätigen, können Sie schnell zurück- bzw. weiterschalten. USB port of your computer USB-Anschluss am Computer Easy Search (Skip backward) Schnelles Suchen (Zurückschalten) Easy Search (Skip forward) Schnelles Suchen (Weiterschalten) Listen Wiedergabe Weiter-/Zurückschalten Sie können festlegen, um wie viele Sekunden beim schnellen Suchen in einer Aufzeichnung jeweils weiter- bzw. zurückgeschaltet wird. Wählen Sie [Options] im Menü [Tool], klicken Sie auf die Registerkarte [Playback Options] und geben Sie die Anzahl an Sekunden für das Weiter- bzw. Zurückschalten an. Im Folgenden sind die Anfangseinstellungen angegeben: [Skip Forward]: 10 Sekunden [Skip Backward]: 3 Sekunden Störungsbehebung Der Fußschalter funktioniert nicht. • Verwenden Sie einen Computer mit den unter „Systemvoraussetzungen" genannten CPU-Spezifikationen. • Überprüfen Sie, ob die Optionen unter [Enable Transcribing Keys] wie in Schritt 2 unter „Verwenden des Fußschalters" beschrieben eingestellt sind. • Lösen Sie das USB-Kabel nicht, wenn die Software „Digital Voice Editor" startet. Andernfalls müssen Sie den Computer neu starten. Wenn Sie beim schnellen Suchen das Pedal loslassen, stoppt die Aufzeichnung nicht. • Öffnen Sie in Windows die Systemsteuerung, wählen Sie [Keyboard], klicken Sie auf die Registerkarte [Speed] und wählen Sie unter [Repeat rate] die Einstellung [Slow]. Die Tastenkombinationen der Anwendung, die Sie zusammen mit „Digital Voice Editor" verwenden, stehen nicht zur Verfügung. • Ändern Sie die Einstellungen für die Tastenkombinationen in der Anwendung, die zusammen mit „Digital Voice Editor" verwendet wird. Es ist kein Ton zu hören. • Stellen Sie die Lautstärke der Lautsprecher über den Anwendungsbildschirm oder mit dem Lautstärkeregler am Computer ein. Technische Daten Abmessungen (B/H/T) ca. 192 × 51 × 121 mm, ohne Kabel Gewicht ca. 510 g Mitgeliefertes Zubehör Digital Voice Editor (CD-ROM) (1) Ohrhörer (1) Änderungen, die dem technischen Fortschritt dienen, bleiben vorbehalten. Zu installierende Anwendung Digital Voice Editor* * Digital Voice Editor, Version IX, kann nicht verwendet werden. Systemvoraussetzungen Ihr Computer und die Systemsoftware müssen den folgenden Mindestvoraussetzungen entsprechen, damit Sie mit dem Produkt arbeiten können: • IBM PC/AT oder Kompatibler - CPU: Pentium II-Prozessor mit 266 MHz oder höher (Pentium III-Prozessor mit 450 MHz oder höher empfohlen) - RAM: mindestens 64 MB - Festplattenplatz: mindestens 70 MB - CD-ROM-Laufwerk - USB-Anschluss - Sound-Karte - Bildschirm: mindestens High Color (16 Bit) und mindestens 800 x 480 Pixel • Betriebssystem: Microsoft® Windows XP Professional/ Windows XP Home Edition/Windows 2000 Professional/Windows Millennium Edition/Windows 98/98 Second Edition (Standardinstallation)