Sony HCD-C450 Operating Instructions - Page 62
Other Operations, Controlling the TV with the Supplied Remote, Switching between TV and DVD
View all Sony HCD-C450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Other Operations Controlling the TV with the Supplied Remote You can control your TV (Sony only) with the supplied remote. Controlling the TV with the remote Number buttons VOL +/- ./> 1 23 4 56 7 89 >10 10/0 TV ?/1 TV/VIDEO ENTER COMMAND MODE DVD/TV switch You can control your TV using the buttons below. By pressing TV [/1 TV/VIDEO You can Turn the TV on or off. Switch the TV's input source between the TV and other input sources. The table below shows the buttons that are affected by the COMMAND MODE DVD/ TV switch. Button 1~9, >10, 10/0 ENTER . > VOL + VOL - DVD TV Standard number Selects channel button function numbers. for DVD. Standard enter function for DVD. Press after selecting a channel number. Standard preceding title, chapter skip function for DVD. TV CH - Standard forward TV CH + title, chapter skip for DVD. VOL + VOL + VOL - VOL - z When you enter a double digit number Depending on the TV set, you can also enter the number as follows: Press >10, then the number. (For example, press >10, then 2 and 5 for entering 25.) Note Depending on the TV, you may not be able to control your TV or to use some of the buttons above. Switching between TV and DVD Using the COMMAND MODE DVD/TV switch, you can switch the remote signal between control of the TV and control of the DVD unit. When you watch the DVD, ensure that you have the COMMAND MODE DVD/TV switch set to DVD. 62GB