Sony HCD-C770 Operating Instructions - Page 82
Specifications
View all Sony HCD-C770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 3 ohm loads, both channels driven, from 150 - 10,000 Hz; rated 70 watts per channel minimum RMS power, with no more than 1 % total harmonic distortion from 250 milliwatts to rated output. Amplifier section Stereo mode 90 W + 90 W (3 ohms at 1 kHz, THD 10 %) Surround mode Front: 90 W + 90 W Center*: 90 W Rear*: 90 W + 90 W (3 ohms at 1 kHz, THD 10 %) Subwoofer*: 100 W (3 ohms at 100 Hz, THD 10 %) * Depending on the sound field settings and the source, there may be no sound output. Inputs (Analog) Inputs (Digital) Outputs (Analog) VIDEO 1, 2: Sensitivity: 150 mV Impedance: 50 kilohms VIDEO 2 (optical): Sensitivity: - VIDEO 1 (AUDIO OUT): Voltage: 2 V Impedance: 1 kilohms PHONES: Accepts low- and high-impedance headphones Super Audio CD/DVD system Laser Semiconductor laser (Super Audio CD/DVD: λ = 650 nm) (CD: λ = 780 nm) Emission duration: continuous Signal format system NTSC or NTSC/PAL Frequency response (at 2 CH STEREO mode) DVD (PCM): 2 Hz to 22 kHz (±1.0 dB) CD: 2 Hz to 20 kHz (±1.0 dB) Signal-to-noise ratio More than 80 dB (VIDEO 1 (AUDIO) connectors only) Harmonic distortion Less than 0.03 % FM tuner section System Tuning range North American model: Other models: Antenna Antenna terminals Intermediate frequency PLL quartz-locked digital synthesizer system 87.5 - 108.0 MHz (100 kHz step) 87.5 - 108.0 MHz (50 kHz step) FM wire antenna 75 ohms, unbalanced 10.7 MHz 82GB