Sony HCD-HDX277WC Operating Instructions - Page 104
The S-AIR function
View all Sony HCD-HDX277WC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Symptom Remedy The system does not work normally. • Disconnect the AC power cord (mains lead) from the wall outlet (mains), then reconnect after several minutes. The Control for HDMI function does not work. • When "HDMI" does not light up in the front panel display, check the HDMI connection (page 28). • Set the [CONTROL FOR HDMI] setting in [HDMI SETUP] to [ON] (page 71). • Make sure that the connected component is compatible with the [CONTROL FOR HDMI] function. • Check that the AC power cord (mains lead) of the connected component is connected securely. • Check the connected component's setting for the Control for HDMI function. Refer to the operating instructions supplied with the component. • If you change the HDMI connection, connect and disconnect the AC power cord (mains lead), or have a power failure, set the [CONTROL FOR HDMI] setting in [HDMI SETUP] to [OFF], then set the [CONTROL FOR HDMI] setting in [HDMI SETUP] to [ON] (page 71). • For details, see "Using the Control for HDMI Function for "BRAVIA" Sync" (page 79). No sound is output from the • Set the [AUDIO (HDMI)] setting in [CUSTOM SETUP] to [ON] (page 71). system and TV while using the • Make sure that the connected TV is compatible with the System Audio Control System Audio Control function. function. • For details, see "Using the Control for HDMI Function for "BRAVIA" Sync" (page 79). The S-AIR function Symptom Remedy S-AIR connection is not established (sound transmission is not established), e.g., the indicator of the S-AIR sub unit does the following: • Turns off. • Flashes. • Turns red. • If you use another S-AIR main unit, place it more than 8 m (26 1/4 feet) away from the unit. • Confirm the ID of the unit and S-AIR sub unit (page 83). • You performed pairing the unit and another S-AIR sub unit. Perform pairing of the desired S-AIR sub unit (page 86). • The unit is paired to another S-AIR sub unit. Cancel pairing. • Install the S-AIR main unit and S-AIR sub unit away from other wireless products. • Stop using another wireless product. • The S-AIR sub unit is turned off. Make sure the AC power cord (mains lead) is connected and turn on the S-AIR sub unit. No sound is heard from the S-AIR product. • If you use another S-AIR main unit, place it more than 8 m (26 1/4 feet) away from the unit. • Confirm the ID of the unit and S-AIR sub unit (page 83). • Confirm the pairing setting (page 86). • Install the S-AIR main unit and S-AIR sub unit closer together. • Avoid use of equipment that generates electromagnetic energy, such as a microwave oven. • Install the S-AIR main unit and S-AIR sub unit away from other wireless products. • Stop using another wireless product. • Change the "RF CHANGE" setting (page 87). • Change the ID settings of the S-AIR main unit and S-AIR sub unit. • Turn off the system and S-AIR sub unit, then turn on them. 104US