Sony HCD-IT1000ES Operating Instructions - Page 135
Specifications, Amplifier HCD-IT1000ES, Video HDMI
View all Sony HCD-IT1000ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Specifications Amplifier Section (HCD-IT1000ES) POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC Output Power) for the US model Front L/Front R: With 3.5 ohms loads, both channels driven, from 200 - 20,000 Hz; rated 50 watts per channel minimum RMS power, with no more than 0.7% total harmonic distortion from 250 milli watts to rated output. Subwoofer: With 2 ohms loads, from 30 - 200 Hz; rated 75 watts per channel minimum RMS power, with no more than 0.7% total harmonic distortion from 250 milli watts to rated output. Power output (rated) for the Canadian model Front L/ Front R 80 W + 80 W (at 3.5 ohms, 1 kHz, 1 % THD) RMS output power (reference) Front L / Front R*: 100 W + 100 W (at 3.5 ohms, 1 kHz, 10 % THD) Center*: 100 W (at 3.5 ohms, 1 kHz, 10 % THD) Subwoofer*: 200 W (at 2 ohms, 100 Hz, 10 % THD) * Depending on the decoding mode settings and the source, there may be no sound output. Amplifier Section (HCD-IS1000) POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC Output Power) for the US model Front L/Front R: With 10 ohms loads, both channels driven, from 800 - 20,000 Hz; rated 35 watts per channel minimum RMS power, with no more than 0.7% total harmonic Additional Information Subwoofer: distortion from 250 milli watts to rated output. With 4 ohms loads, both channels driven, from 30 800 Hz; rated 75 watts per channel minimum RMS power, with no more than 0.7% total harmonic distortion from 250 milli watts to rated output. Power output (rated) for the Canadian model Front L/ Front R 35 W + 35 W (at 10 ohms, 1 kHz, 1 % THD) RMS output power (reference) Front L / Front R*: 50 W + 50 W (at 10 ohms, 1 kHz, 10 % THD) Center*: 50 W (at 10 ohms, 1 kHz, 10 % THD) Subwoofer*: 100 W (at 4 ohms, 70 Hz, 10 % THD) + 100 W (at 4 ohms, 500 Hz, 10 % THD) * Depending on the decoding mode settings and the source, there may be no sound output. Inputs (Analog) TV, SAT/CABLE Sensitivity: 450 mV (ATT ON), 250 mV (ATT OFF) Impedance: 50 kilohms Inputs (Digital/COAXIAL) SAT/CABLE, TV Impedance: 75 ohms Video Section Outputs Inputs HDMI section Connector Video inputs VIDEO: 1 Vp-p 75 ohms S VIDEO: Y: 1 Vp-p 75 ohms C: 0.286 Vp-p 75 ohms COMPONENT: Y: 1 Vp-p 75 ohms PB/CB, PR/CR: 0.7 Vp-p 75 ohms VIDEO: 1 Vp-p 75 ohms COMPONENT: Y: 1 Vp-p 75 ohms PB/CB, PR/CR: 0.7 Vp-p 75 ohms HDMI 19pin-standard connector HDMI1, HDMI2: 640 × 480p@60 Hz 720 × [email protected]/60 Hz 135US