Sony HDR-CX580V Operating Guide - Page 72
Self-diagnosis display/Warning indicators
View all Sony HDR-CX580V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Your camcorder is recording the image you have just shot on the recording media. You cannot make new recording during this period. The recording media is full. Delete unnecessary images (p. 51). Total number of movie scenes or photos exceeds the recordable capacity of your camcorder (p. 75, 78). Delete unnecessary images (p. 51). The camcorder stops operating. The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place. The temperature of your camcorder is extremely low. Turn off your camcorder and take it to a warm place. Leave the camcorder there for a while, then turn on the camcorder. "PlayMemories Home" cannot be installed. Check the computer environment or installation procedure required to install "PlayMemories Home." "PlayMemories Home" does not work correctly. Quit "PlayMemories Home" and restart your computer. The camcorder is not recognized by the computer. Disconnect devices from the USB jack of the computer other than the keyboard, mouse, and your camcorder. Disconnect the Built-in USB Cable from the computer and your camcorder, and restart the computer, then connect the computer and your camcorder again in the correct order. When both the Built-in USB Cable and the USB jack of the camcorder are connected to the external devices at the same time, disconnect one that is not connected to a computer. US 72 Self-diagnosis display/Warning indicators If indicators appear on the LCD screen, check the following. If the problem persists even after you have tried to fix a couple of times, contact your Sony dealer or local authorized Sony service facility. In this case, when you contact them, give them all the numbers of the error code beginning with C or E. You may hear a melody when some warning indicators appear on the screen. C:04: The battery pack is not an "InfoLITHIUM" battery pack (V series). Use an "InfoLITHIUM" battery pack (V series) (p. 19). Connect the DC plug of the AC Adaptor to the DC IN jack of your camcorder securely (p. 19). C:06: The battery pack temperature is high. Change the battery pack or place it in a cool place. C:13: / C:32: Remove the power source. Reconnect it and operate your camcorder again. E Follow the steps from on page 71. The internal hard disk of the camcorder is full. An error may have occurred with the internal hard disk of the camcorder.