Sony HDR SR7 Operating Guide - Page 9

Step 2: Charging the battery pack 3 4 Getting Started Battery pack 5 DC IN jack POWER switch 5 1 /CHG lamp DC plug 2 AC Adaptor Power cord To the wall outlet You can charge the "InfoLITHIUM" battery pack (H series) after attaching it to your camcorder. b Notes • Your camcorder operates only with an "InfoLITHIUM" battery pack (H series). 1 Connect the AC Adaptor to the DC IN jack on the Handycam Station. Be sure that the v mark on the DC plug is facing up. 2 Connect the power cord to the AC Adaptor and the wall outlet. 5 Set the camcorder onto the Handycam Station securely. The /CHG (charge) lamp lights up and charging starts. The /CHG (charge) lamp turns off when the battery pack is fully charged. Remove the camcorder from the Handycam Station. To remove the battery pack Slide the POWER switch to OFF (CHG). Slide the BATT (battery release) lever and remove the battery pack. BATT (battery release) lever 3 Slide the POWER switch in the direction of the arrow to OFF (CHG) (the default setting). 4 Attach the battery pack by sliding it in the direction of the arrow until it clicks. b Notes • When you remove the battery pack or the AC Adaptor, make sure that the (Movie) lamp/ (Still) lamp (p. 11) is turned off. 9