Sony HT-1750DP Operating Instructions - Page 46

Specifications (continued) SA-WMSP75 for sub woofer AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 6 ohm loads, from 28 - 200 Hz; rated 75 watts (SA-WMSP75), minimum RMS power, with no more than 0.8% total harmonic distortion from 250 milliwatts to rated output. Speaker system Active subwoofer, magnetically shielded Speaker unit Woofer: 20 cm cone type Enclosure type Acoustically loaded bass reflex Continuous RMS power output (6 ohms, 20 - 250 Hz) 75 W Reproduction frequency range 28 Hz - 200 Hz High frequency cut-off frequency 150 Hz Input LINE IN (input pin jacks) Power requirements 120 V AC, 60 Hz Power consumption 75 W Dimensions (w/h/d) Approx.10 3/4 × 12 7/8 × 15 3/4 inches including front panel Mass Approx. 19 lb 14 oz Supplied accessories FM wire antenna (1) AM loop antenna (1) Speaker connecting cord, long (2) Speaker connecting cord, short (3) Monaural connecting cord (1 phono to 1 phono) (1) Coaxial digital cord (1) Foot pads (speakers) (20) Foot pads (subwoofer) (4) Remote commander (1) R6 (size -AA) batteries (2) Speakers • Front speakers (2) • Center speaker (1) • Surround speakers (2) • Sub woofer (1) For details on the area code of the component you are using, see page 4. Design and specifications are subject to change without notice. 46US