Sony HT-6600DP Operating Instructions - Page 35
Adjustments using the, SET UP menu, Changing the command, mode of the receiver
View all Sony HT-6600DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Other Operations Adjustments using the SET UP menu The SET UP menu allows you to make the following adjustments. 1 Press MAIN MENU repeatedly to select " SET UP ". 2 Press or to select the parameter you want to adjust. 3 Turn the jog dial to select the setting you want. The setting is entered automatically. Initial settings Parameter DEC. XXXX Initial setting PCM (for DVD, CD/SACD and MD/TAPE), AUTO (for VIDEO 2) x Decode priority (DEC. XXXX) Sets the appropriate decoding for incoming digital signals. • PCM priority mode (DEC. PCM) Use to enjoy playback from audio CD (PCM), DVD and MD. When used with media other than CD, DVD or MD, you may experience noise. If this happens, switch to AUTO mode. • AUTO mode (DEC. AUTO) Use to enjoy playback from audio CD (PCM), DVD, DTS-CD and DTS-LD sources. However, with audio CDs, you may not be able to listen the very first moments of each track. Normally, use as-is with the initial settings above. Changing the command mode of the receiver This function is useful when you use 2 Sony receivers in the same room. 1 Turn off the receiver. 2 Hold down ENTER and press 1/u to turn on the receiver. "C.MODE.AVX" appears in the display. Each time you repeat the procedure above, the display changes as follows: C.MODE.AV1 y C.MODE.AV2 Tip The initial setting is "C.MODE.AV2". Notes • The initial setting for the command mode of the supplied remote is "AV2". • If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver. 35US