Sony HT-DDW750 Operating Instructions - Page 35
Changing the command, mode of the receiver
View all Sony HT-DDW750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
x Decode priority (DEC. XXXX) Sets the appropriate decoding for incoming digital signals. • PCM priority mode (DEC. PCM) Use to enjoy playback from audio CD (PCM) and DVD. When used with media other than CD or DVD, you may experience noise. If this happens, switch to AUTO mode. • AUTO mode (DEC. AUTO) Use to enjoy playback from audio CD (PCM), DVD, DTS-CD and DTS-LD sources. However, with audio CDs, you may not be able to listen the very first moments of each track. Normally, use as-is with the initial settings above. Changing the command mode of the receiver This function is useful when you use 2 Sony receivers in the same room. 1 Turn off the receiver. 2 Hold down ENTER and press 1/u to turn on the receiver. "C.MODE.AVX" appears in the display. Each time you repeat the procedure above, the display changes as follows: C.MODE.AV1 y C.MODE.AV2 Tip The initial setting is "C.MODE.AV2". Notes • The initial setting for the command mode of the supplied remote is "AV2". • If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver. Other Operations 35GB