Sony HT-ST5000 Startup Guide

2

Connecting with a TV and other devices

YES

HDMI cable

(not supplied)

Optical digital cable

(not supplied)

: Video signals

: Audio signals

Blu-ray Disc player, cable

box or satellite box, etc.

HDMI cable

(supplied)

NO

Is the HDMI IN jack on your TV labeled “ARC” ?

HDMI cable

(not supplied)

: Video signals

: Audio signals

Blu-ray Disc™ player, cable

box or satellite box, etc.

HDMI cable

(supplied)



Connect devices such as a Blu-ray Disc player, cable box, or satellite box to any of the HDMI IN jacks (HDMI1/2/3) on the Bar Speaker.

When devices such as a Blu-ray Disc player, cable box, or satellite box are currently connected to a TV, disconnect them from the TV and then connect them to the Bar Speaker to

reproduce the high quality surround sound of Dolby Atmos, Dolby TrueHD, Dolby Digital Plus.



Connect a TV to the HDMI OUT jack on the Bar Speaker. If the TV is not compatible with ARC, also connect the TV to the TV IN (OPT) jack on the Bar Speaker.

Tip

•

The Standby Through function allows you to output HDMI signals to the TV even when the system is in standby mode.

Adjust the setting as follows: Press HOME -

[Setup] -

[System Settings] - [HDMI Settings] - [Standby Through], then select [Auto] or [On].

•

When your TV does not have both an OPTICAL OUT jack and an HDMI IN jack, refer to “Connecting a TV or Portable Audio Device via the ANALOG IN Jack” in the Operating Instructions (separate document) for a

connection method.

Note

•

Make sure that the cables are firmly inserted.

•

To watch 4K video content, refer to “Connecting a 4K TV and 4K Devices” in the Operating Instructions (separate document).

1

Deciding the installation position

Ceiling height: 14 ft or less (4.3 meters or less)

To obtain the good surround sound, set the

ceiling height of the room where the

system is installed.

For details, see “Customizing the Speaker

Settings for Surround Sound” in the

Operating Instructions (separate

document).

Subwoofer

Bar Speaker

To mount the Bar Speaker on a

wall

Refer to “Mounting the Main Unit

on a Wall” in the Operating

Instructions (separate document).

Note

•

Do not place magnetic cards on the system or near the system.

•

Do not place metal objects other than a TV around the system. Wireless functions may become unstable.

What’s in the box

Bar Speaker (1)

Grille frame (1)

Subwoofer (1)

Remote control (1)

R03 (size AAA) battery (2)

HDMI cable (supports the

specification equal to Premium

High Speed HDMI cable with

Ethernet) (1)

WALL MOUNT TEMPLATE (1)

Operating Instructions

Startup Guide (this document)

About the operation method of the system

Connect this system and the TV with the HDMI cable (supplied) to display the operation screen of

the system on the TV.

Continued on back page

© 2017 Sony Corporation

Printed in Malaysia

4-687-836-

11

(1)

Startup Guide

Sound Bar : HT-ST5000