Sony HT-ST5000 Startup Guide - Page 1

What's in the box Bar Speaker (1) Grille frame (1) Subwoofer (1) Remote control (1) R03 (size AAA) battery (2) HDMI cable (supports the specification equal to Premium High Speed HDMI cable with Ethernet) (1) 2 Connecting with a TV and other devices Is the HDMI IN jack on your TV labeled "ARC" ? YES NO Startup Guide Sound Bar : HT-ST5000 WALL MOUNT TEMPLATE (1) Operating Instructions Startup Guide (this document) About the operation method of the system Connect this system and the TV with the HDMI cable (supplied) to display the operation screen of the system on the TV. HDMI cable (supplied) HDMI cable (supplied) Optical digital cable (not supplied) 1 Deciding the installation position Subwoofer Bar Speaker Ceiling height: 14 ft or less (4.3 meters or less) To obtain the good surround sound, set the ceiling height of the room where the system is installed. For details, see "Customizing the Speaker Settings for Surround Sound" in the Operating Instructions (separate document). To mount the Bar Speaker on a wall Refer to "Mounting the Main Unit on a Wall" in the Operating Instructions (separate document). HDMI cable (not supplied) HDMI cable (not supplied) : Video signals : Audio signals Blu-ray Disc™ player, cable box or satellite box, etc. : Video signals : Audio signals Blu-ray Disc player, cable box or satellite box, etc.  Connect devices such as a Blu-ray Disc player, cable box, or satellite box to any of the HDMI IN jacks (HDMI1/2/3) on the Bar Speaker. When devices such as a Blu-ray Disc player, cable box, or satellite box are currently connected to a TV, disconnect them from the TV and then connect them to the Bar Speaker to reproduce the high quality surround sound of Dolby Atmos, Dolby TrueHD, Dolby Digital Plus.  Connect a TV to the HDMI OUT jack on the Bar Speaker. If the TV is not compatible with ARC, also connect the TV to the TV IN (OPT) jack on the Bar Speaker. Tip • The Standby Through function allows you to output HDMI signals to the TV even when the system is in standby mode. Adjust the setting as follows: Press HOME - [Setup] - [System Settings] - [HDMI Settings] - [Standby Through], then select [Auto] or [On]. • When your TV does not have both an OPTICAL OUT jack and an HDMI IN jack, refer to "Connecting a TV or Portable Audio Device via the ANALOG IN Jack" in the Operating Instructions (separate document) for a connection method. Note • Make sure that the cables are firmly inserted. • To watch 4K video content, refer to "Connecting a 4K TV and 4K Devices" in the Operating Instructions (separate document). Note • Do not place magnetic cards on the system or near the system. • Do not place metal objects other than a TV around the system. Wireless functions may become unstable. 4-687-836-11(1) Continued on back page © 2017 Sony Corporation Printed in Malaysia