Sony HT-ST7 Reference Guide - Page 15
Specifications, RESET, Bar Speaker SA-ST7 - problems
View all Sony HT-ST7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Make sure you are pressing the correct button on the remote control. TV remote control does not work. This problem might be solved by using the IR blaster supplied (page 9). The Control for HDMI function does not work properly. Check the HDMI connection. Set up the Control for HDMI function on the TV. Make sure that any equipment connected is compatible with "BRAVIA" Sync. Check the Control for HDMI settings on the connected equipment. Refer to the operating instructions supplied with the connected equipment. If you connect/disconnect the AC power cord (mains lead), wait for more than 15 seconds and operate the system. If you connect the audio output of the video equipment and the system using a cable other than an HDMI cable, no sound may be output because of "BRAVIA" Sync. In this case, set "CTRL" to "OFF" (refer to "Adjusting the settings" in the Operating Instructions) or connect the audio output jack directly to the TV instead of the system. "PRTECT (protect)" appears on the front panel display. Press the button to turn off the system. After "STBY" disappears, disconnect the AC power cord (mains lead), then check that nothing is blocking the ventilation holes of the system. RESET If the system still does not operate properly, reset the system as follows: 1 Press the button to turn on the Bar Speaker. 2 Press the button while pressing INPUT and VOL on the Bar Speaker. "RESET" appears and the system is reset. The menu, SOUND MODE, etc., return to the default settings. Specifications Bar Speaker (SA-ST7) Amplifier section U.S. models: POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC) Front L + Front R: With 4 ohms loads, both channels driven, from 200 - 20,000 Hz; rated 25 Watts per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 milliwatts to rated output. POWER OUTPUT (reference) Front L/Front R speaker blocks: 50 Watts (per channel at 4 ohms, 1 kHz) Center speaker block: 50 Watts (per channel at 4 ohms, 1 kHz) Canadian models: POWER OUTPUT (rated) Front L + Front R: 35 W + 35 W (at 4 ohms, 1 kHz, 1 % THD) POWER OUTPUT (reference) Front L/Front R speaker blocks: 50 Watts (per channel at 4 ohms, 1 kHz) Center speaker block: 50 Watts (per channel at 4 ohms, 1 kHz) Inputs HDMI IN 1/2/3* OPTICAL IN 1(TV)/2 ANALOG IN COAXIAL IN * These 3 jacks are identical. Using any of them makes no difference. Output HDMI TV OUT (ARC) BLUETOOTH section Communication system BLUETOOTH Specification version 3.0 continued 15US