Sony HT-V600DP HTV600DP Operating Instructions (main amp/tuner for HTV) - Page 40

Controlling the TV with the Supplied Remote By adjusting the remote signal, you can control your TV with the supplied remote. Notes If you enter a new code number, the code number previously entered will be erased. When you replace the batteries of the remote, the code number may be reset to the default (SONY) setting. Reset the appropriate code number. Controlling TVs with the remote Press and hold TV @ / 1 while entering your TV's manufacturer's code (see the table) using the number buttons and press ENTER. Then release TV @ / 1. TV @ / 1 TV VOL +/- TV CH +/- TV/VIDEO Number Buttons Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. Manufacturer Code Number SONY 501 AIWA 553, 501 DAEWOO 504, 505, 506, 507, 515, 544 FISHER 508 GOLDSTAR/LG 503, 511, 512, 515, 534, 544 GRUNDIG 517, 534 HITACHI 513, 514, 515, 544 JVC 516 MAGNAVOX 503, 518, 544 MITSUBISHI/MGA 503, 519, 544 NEC 503, 520, 544 PANASONIC 509, 524 PHILIPS 515, 518 PIONEER 509, 525, 526, 540 RCA/PROSCAN 510, 527, 528, 529, 544 SAMSUNG 503, 515, 531, 532, 533, 534, 544 SANYO 508, 545, 546, 547 SHARP 535 TELEFUNKEN 523, 536, 537, 538 THOMSON 537, 539 TOSHIBA 535, 540, 541 ZENITH 542, 543 ENTER Controlling the TV You can control your TV using the buttons below. By pressing TV @ / 1 TV/VIDEO You can Turn the TV on or off. Switch the TV's input source between the TV and other input sources. Note Depending on the TV, you may not be able to control your TV or to use some of the buttons above. 40