Sony ILCE-3000K Instruction Manual - Page 75
Shooting images, The flash does not work.
View all Sony ILCE-3000K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Shooting images Nothing is displayed on the LCD screen when the power is turned on. • If you do not operate the camera for given period of time, the camera turns to power saving mode. To cancel the power save, operate the camera, such as pressing the shutter button halfway down. • The screen display is set to the viewfinder. Press the FINDER/LCD button to switch the display to the LCD screen. The shutter does not release. • You are using a memory card with a write-protect switch, and the switch is set to the LOCK position. Set the switch to the recording position. • Check the free capacity of the memory card. • You cannot record images while charging the flash. • The lens is not attached properly. Attach the lens properly (page 18). Recording takes a long time. • The noise reduction function is turned on. This is not a malfunction. • You are shooting in the RAW mode. Since the RAW data file is large, the RAW mode shooting may take time. • The [Auto HDR] is processing an image. Others The image is out of focus. • The subject is too close. Check the minimum focal distance of the lens. • You are shooting in manual focus mode. Set [AF/MF Select] to [Autofocus]. • Ambient light is insufficient. • The subject may require special focusing. Use the [Flexible Spot] or manual focus function. The flash does not work. • Press the (Flash pop-up) button to pop up the flash (page 47). • You cannot use a flash with the following shooting mode: - [Bracket: Cont.] - [Sweep Panorama] - [Night Scene], [Hand-held Twilight] and [Anti Motion Blur] in [Scene Selection] - Movie recording Fuzzy white circular spots appear on images shot using the flash. • Particles (dust, pollen, etc.) in the air reflected the flash light and appeared on GB the image. This is not a malfunction. 75