Sony ILCE-7RM4 Help Guide - Page 464

To set the exposure compensation value using the MENU You can adjust the exposure compensation value within a range of -5.0 EV to +5.0 EV when the exposure compensation dial is set to "0." MENU→ (Camera Settings1) → [Exposure Comp.] → desired setting. Hint You can operate the exposure compensation dial any time you want while the exposure compensation dial lock is released. The exposure compensation dial lock prevents unintentional changes to exposure compensation values. Note You cannot perform the exposure compensation in the following shooting modes: [Intelligent Auto] When using [Manual Exposure], you can perform the exposure compensation only when [ISO] is set to [ISO AUTO]. The settings of the exposure compensation dial will be prioritized over [Exposure Comp.] or [Dial Ev Comp] in MENU. Only a value between -3.0 EV and +3.0 EV with the equivalent image brightness appears on the screen when shooting. If you set an exposure compensation value outside this range, the image brightness on the screen will not be affected, but the value will be reflected in the recorded image. You can adjust the exposure compensation value within the range of -2.0 EV to +2.0 EV for movies. If you shoot a subject in extremely bright or dark conditions, or when you use the flash, you may not be able to get a satisfactory effect. When you set the exposure compensation dial to "0" from a setting other than "0," the exposure value switches to "0" regardless of the [Exposure Comp.] setting. Related Topic Exposure step Dial Ev Comp Exp.comp.set Cont. Bracket Single Bracket Zebra Setting 5-007-328-12(1) Copyright 2019 Sony Corporation 464