Sony ILCE-9M2 Help Guide - Page 411

Connect the camera and the computer or switching hub using the LAN cable, and select MENU→ (Network) → [PC Remote Function] → [Pairing] on the camera, then use Remote Camera Tool to pair the camera and the computer. Select [OK] on the pairing confirmation screen displayed on the camera to finish pairing. Pairing information is deleted when you initialize the camera. When [PC Remote Cnct Method] is set to [Wi-Fi Direct] Use the camera as an access point, and connect the computer to the camera directly via Wi-Fi. Select MENU→ (Network) → [PC Remote Function] → [Wi-Fi Direct Info.] to display the Wi-Fi connection information (SSID and password) for the camera. Connect the computer and the camera using the Wi-Fi connection information displayed on the camera. When [PC Remote Cnct Method] is set to [Wi-Fi Access Point] Connect the camera and the computer via Wi-Fi using a wireless access point. The camera and the computer need to be paired in advance if [Connect without Pairing] is set to [Disable]. Select MENU→ (Network) → [Wi-Fi Settings] → [WPS Push] or [Access Point Set.] to connect the camera to the wireless access point. Connect the computer to the same wireless access point. Select MENU → (Network) → [PC Remote Function] → [Pairing] on the camera, and then use Imaging Edge (Remote) to pair the camera and the computer. Select [OK] on the pairing confirmation screen displayed on the camera to finish pairing. Pairing information is deleted when you initialize the camera. Note When an unrecordable memory card is inserted into the camera, you cannot record still images even if [Still Img. Save Dest.] is set to [Camera Only] or [PC+Camera]. When [Camera Only] or [PC+Camera] is selected and no memory card is inserted into the camera, the shutter will not be released even if [Release w/o Card] is set to [Enable]. While a still image is being played back on the camera, you cannot shoot with [PC Remote]. [RAW+J PC Save Img] can only be selected when [ File Format] is set to [RAW & JPEG]. If you set [Connect without Pairing] to [Enable], unintended third parties may access the camera. Sony is not liable for any problems or damage caused by setting [Connect without Pairing] to [Enable]. (when the camera's system software (firmware) is Ver.2.00 or later) 5-010-476-12(1) Copyright 2019 Sony Corporation 411