Sony KD-34XBR970 Operating Instructions - Page 59

Other Info Other SETUP Problem Possible Remedies Double images or ghosts ❏ Using a highly directional outdoor antenna or a cable may solve the problem. "Black box" on screen ❏ You have selected a text option in the Setup Settings and no text is available. (See page 45 to reset Setup selections.) To turn off this feature, set the Caption Vision option to Off. If you were trying to select closed captioning, select CC1 instead of TEXT 1-4. Bars appear at the ❏ Some wide-screen programs are filmed in aspect ratios that are greater top and bottom of the screen than 16:9, such as 2.35:1. (This is especially common with theatrical releases). Your TV will show these programs with bars at the top and bottom of the screen. For more details, check the documentation that came with your DVD (or contact your program provider). General Problem Possible Remedies How to reset TV to ❏ Turn on the TV. While holding down the RESET button on the remote factory settings control, press the POWER button on the TV. (The TV will turn itself off, then back on again.) Release the RESET button. How to restore Picture ❏ Press the RESET button on the remote control while in the Picture Settings settings to factory settings (see page 35). How to restore Sound ❏ Press the RESET button on the remote control while in the Sound Settings settings to factory settings (see page 37). Cannot cycle through the ❏ Be sure the Label Video Inputs option is not set to Skip (see page 45). other video equipment connected to the TV Cannot operate Menu ❏ If a Menu option appears in gray, this indicates that the TV is in a state in which the Menu option is not available. Lost password ❏ In the password screen (see page 42), enter the following master password: 4357. The master password clears your previous password; it cannot be used to temporarily unblock channels. TV makes "popping" sound ❏ This is a normal sound that results from the TV automatically degaussing when turned on each time it is turned on. TIMER/STAND BY LED on ❏ This LED blinks when the TV is turned on, then shuts off when the picture front panel is lit is displayed. If the LED blinks for more than a minute, this may indicate the TV needs service. Digital cable box does not ❏ If you are connecting a VCR and digital cable box using a splitter, as work described on page 9, you must use a special bi-directional splitter that is designed to work with your digital cable box. Contact your cable TV company for details. Cannot record digital ❏ Only analog channels can be recorded to your VCR. channels to VCR SETUP SETUP Other Info 52