Sony KDE-42XBR950 Operating Instructions - Page 7
Continued, Recommended place for the Media receiver unit, Weight, Ventilation, Outdoor use - tv stand
View all Sony KDE-42XBR950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Recommended place for the Media receiver unit Place the Media receiver unit on a stable, level surface. Otherwise, the Media receiver unit may fall and cause injury. Use an optional Sony stand, which has adequate strength. Weight Do not stand on the Media receiver unit. The unit may fall or break, causing injury. Pay special attention to little children. Ventilation The slots and openings in the media receiver unit and display unit are provided for necessary ventilation. To ensure reliable operation of the set, and to protect it from overheating, these slots and openings must never be blocked or covered. Unless proper ventilation is provided, the unit may gather dust and get dirty. For proper ventilation, Observe the following: s Do not install the unit turned backward or sideways. s Do not install the unit turned over or upside down. s Never cover the slots and openings with a cloth or other materials. s Never block the slots and openings by placing the set on a bed, sofa, rug or other similar surface. s Never place the set in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided. s Do not place the set near or over a radiator or heat register, or where it is exposed to direct sunlight. Ventilation Leave some space around the unit. Otherwise, adequate air-circulation may be blocked causing overheating and cause fire or damage the unit. When installing the unit on the wall 30 cm (11 7/8 in) Never install the unit as follows: Air circulation is blocked. Air circulation is blocked. Media receiver unit: Front view 5 cm (2 in) POWER POWER/STANDBY TIMER i.LINK/STANDBY 7 cm (2 7/8 in) TV VIDEO MEMORY STICK i.LINK PIC OFF i.LINK INPUT SELECT - VOL + - CHANNEL + 0.5 cm (7/32 in) 5 cm (2 in) Leave this space at least. Place the Media receiver unit on a stable level surface so as not to block the inlets at the bottom of the Media receiver unit. Media receiver unit: Top view Never place the Media receiver unit in a confined space. It may cause overheating and result in fire, or damage the unit. Ensure reliable operation of the unit by ensureing proper ventilation of the exhaust fan. 10 cm (4 in) Leave this space at least. 5 cm (2 in) 5 cm (2 in) 10 cm (4 in) 10 cm (4 in) 10 cm (4 in) Leave this space at least. When installing the unit using a stand 30 cm (11 7/8 in) 10 cm (4 in) 10 cm (4 in) Leave this space at least. Outdoor use Do not install this unit outdoors. If the unit is exposed to rain, it may result in fire or electric shock. If the unit is exposed to direct sunlight, the unit may heat up and it may damage the unit. Vehicle and ceiling Do not install this unit in a vehicle or hung from the ceiling. Bumping of the vehicle may cause the set to fall down and cause injury. (Continued) 5