Sony KDE-50XBR950OL Operating Instructions - Page 29
Cable Box and Cable Only, remote control for your specific cable box; see Programming
View all Sony KDE-50XBR950OL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Setup Cable Box and Cable Only For best results, use this connection if: s Your cable company scrambles some channels, such as premium channels (which requires you to use a cable box), but does not scramble all channels. s You do not have a VCR. (If you have a VCR, see pages 31 and 33.) With this connection you can: s Use the TV remote control to change channels coming through the cable box to the TV's VHF/UHF input jack. (You must first program the remote control for your specific cable box; see "Programming the Remote Control" on page 52.) s Use the TV remote control to change channels coming directly into the TV's CABLE input. (The TV's tuner provides a better signal than the cable box.) Coaxial cable CATV cable Splitter IN OUT Coaxial Cable box cable Coaxial cable CABLE VHF/UHF Rear of Media receiver unit About Using This Connection with Dual Picture (Twin View, etc.) Features With this connection, you can use all the dual picture features for unscrambled channels coming directly into the TV's CABLE input jack. Notes on Using This Connection To Do This ... Use the cable box Set up the TV remote control to operate the cable box Activate the remote control to operate the cable box Prevent the accidental switching of TV channels Switch the TV's input between the cable box and cable Do This ... Tune the TV to the channel the cable box is set to (usually channel 3 or 4) and then use the cable box to switch channels. Program the remote control. See "Programming the Remote Control" on page 52. Press FUNCTION repeatedly until the SAT/CABLE indicator lights up. When using the cable box, you need the TV to stay on the channel the cable box is set to (usually channel 3 or 4). You can use the TV's Channel Fix feature to lock in a specific channel. For details, see "Using the Channel Menu" on page 103. Press ANT to switch back and forth between the TV's VHF/UHF (scrambled channels) and CABLE (unscrambled) inputs. Do not leave the display indication of the cable box turned on. (Continued) 27