Sony KDF E42A10 Operating Instructions - Page 92
Audio, Channels, MUTING, Speaker, Stereo, FUNCTION, Auto SAP, Audio Out, Fixed, Variable, Auto Program - picture problems
UPC - 027242675308
View all Sony KDF E42A10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Other Information Audio Problem Good picture, no sound Audio noise Cannot gain enough volume when using a cable box Sound seems weak or insufficient Cannot raise the volume on external speakers Possible Remedies ❏ Press MUTING so that Muting disappears from the screen (see page 44). ❏ Make sure the Speaker option is set to On in the Audio setting (see page 67). ❏ Make sure the MTS option is set to Stereo or Mono (see page 67). ❏ When the HDMI IN input is in use, surround sound, such as AC-3 and DTS, cannot be input. Change the sound setting for the external input device to Linear PCM. ❏ Communication problems may occur if infrared communication equipment (e.g., infrared cordless headphones) is used near the TV. Use headphones other than infrared cordless headphones. Also, if you use infrared communication equipment other than infrared cordless headphones, move the infrared transceiver away from the TV until the noise is eliminated, or move the transmitter and receiver of the infrared communication equipment closer together. ❏ Increase the volume of the cable box using the cable box's remote control. Then press TV(FUNCTION) once (the TV indicator lights up) and adjust the TV's volume. ❏ The TV's audio might be set to Auto SAP or Mono, when it might be better set to Stereo. In the Audio setting (see page 67), set the MTS setting to Stereo. If already set to Stereo, switch to Mono (which may reduce background noise during weak stereo broadcasts). ❏ If the Speaker option is set to Off and the Audio Out option is set to Fixed (in order to output the sound to your audio system), use your audio receiver to adjust the sound (see page 67). Or, to use the TV remote control, set the Audio Out option to Variable. ❏ To turn on the TV speakers, set the Speaker option to On (see page 67). Channels Problem Possible Remedies Cannot receive upper channels ❏ Press ANT to select the VHF/UHF input (see page 44). (UHF) when using an antenna ❏ Use Auto Program in the Channel setting to add receivable channels that are not presently in the TV's memory (see page 72). Cannot receive any channels ❏ Use Auto Program in the Channel setting to add receivable channels that are not when using cable TV presently in the TV's memory (see page 72). ❏ Press ANT to select the CABLE input (see page 44). Cannot receive or select ❏ Use Auto Program in the Channel setting to add receivable channels that are not channels presently in TV memory (see page 72). Some digital cable channels are ❏ Certain cable companies have limitations on the broadcast of digital cable not being displayed channels. Check with your cable company for more information. ❏ The digital cable channel may be set to Hidden in the Channel setting (see page 72). 92