Sony KDL-46EX710 Additional Information for Using Sony® Wall-Mount Bra - Page 5
Install the Base Bracket on the wall., Disconnect all the cables from the TV., Secure the Mounting - model number
UPC - 027242807990
View all Sony KDL-46EX710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Model Name KDL-32EX40* KDL-46EX405 KDL-32EX30* Display dimensions 31 1/2 (800) 19 5/8 (497) 44 3/8 (1,127) 26 5/8 (674) 31 1/2 (800) 19 5/8 (497) Screen center dimensions 6 7/8 (172) 3 3/8 (84) 6 7/8 (172) Unit: inches (mm) Length for each mounting angle Angle (0°) Angle (20°) 16 7/8 (426) 6 1/4 (157) 12 (303) 18 5/8 (470) 18 1/4 (461) 16 3/4 (424) 6 1/2 (162) 14 5/8 (369) 25 1/4 (640) 18 3/8 (464) 16 7/8 (426) 6 1/4 (157) 12 (303) 18 5/8 (470) 18 1/4 (461) * In the actual model names, the "" indicates numbers and/or characters specific to each model. ** Do not install the TV in an inclined position. It is designed to be operated in a vertical position only. Eject and take out any disc from the built-in BD player before installing the TV on a wall. Figures in the above table may differ slightly depending on the installation. CAUTION The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV. Refer to your TV's operating instructions for its weight. 3 Install the Base Bracket on the wall. Refer to the Instructions for SU-WL500. 4 Disconnect all the cables from the TV. 5 Secure the Mounting Hook to the rear of the TV. Determine the screw locations and secure the Mounting Hooks to the rear of the TV. Refer to the "Screw and Hook Locations Diagram/Table" shown below. KDL‑HX70*, KDL-EX50*, KDL-EX40*, KDL-EX30* only Square hole Mounting Hook Screw (+PSW6 × 16) Additional Information for Using Sony Wall-Mount Bracket (SU-WL500) − −