Sony KDL-52WL135 Operating Instructions - Page 31
Screen Settings
View all Sony KDL-52WL135 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Steady Sound On Stabilizes the volume across all programs and commercials. Off Turns off Steady Sound. Volume Offset Adjusts the volume level of the current input (TV or video input) relative to other inputs. ~ • Sound settings for PC Timings (HDMI or PC input) are same as all other input modes (see above for details). Using the Menus Screen Settings Wide Mode Auto Wide 4:3 Default Select the default screen mode to use for 4:3 sources Display Area Wide Zoom Fills the screen with minimum distortion. Normal Displays the 4:3 picture in its original aspect ratio when the original source is 4:3. Full Enlarges the picture horizontally to fill the screen when the original source is 4:3 (Standard-definition source). When the original source is 16:9 (High-definition source), select this mode to display the 16:9 picture in its original size. Zoom Enlarges the picture horizontally and vertically to fill the screen while maintaining the aspect ratio. ~ • Wide Mode can also be accessed by pressing WIDE on the remote control. • See WIDE button description on page 22 for accessing Wide Mode. On Automatically changes Wide Mode setting based upon content. If frequent screen changes are disturbing to you, select Off. Off Turns off Auto Wide. Choose a screen mode from the Wide Mode option. Wide Zoom Enlarges the 4:3 picture to fill the 16:9 screen, displaying as much of the original image as possible. Normal Displays the 4:3 picture in its original aspect ratio. Full Enlarges the 4:3 picture horizontally only, to fill the screen. Zoom Enlarges the picture horizontally and vertically to fill the screen while maintaining the aspect ratio. Off Continues using the current Wide Mode setting when the channel or input is changed. ~ • 4:3 Default is not available when Auto Wide is set to Off. • If 4:3 Default is set to anything but Off, the Wide Mode setting applies only to the current channel. When you change channels (or inputs), Wide Mode is automatically replaced with the 4:3 Default setting for 4:3 sources. To retain the current Wide Mode setting as channels and inputs are changed, set 4:3 Default to Off. Full Pixel Displays the picture for 1080i or 1080p sources in its original size. +1 Displays the original picture area. This setting can be selected for HDMI input video signals, except for 1080i or 1080p signals. Normal Displays the recommended picture area. -1/-2 Enlarges the picture to hide the edge of the picture. (Continued) 31