Sony KDP-57WS550 Primary User Manual - Page 115
General, Cannot operate Menu - 5 blinks
View all Sony KDP-57WS550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Welcome SETUP General Problem Possible Remedies How to reset TV to ❏ Turn on the TV. While holding down the RESET button on the remote factory settings control, press the POWER button on the TV. (The TV will turn itself off, then back on again.) Release the RESET button. How to restore Video settings ❏ Press the RESET button on the remote control while in the Video Menu (see to factory settings page 92). How to restore Audio ❏ Press the RESET button on the remote control while in the Audio Menu (see settings to factory settings page 94). Cannot cycle through the ❏ Be sure the Video Label option is not set to Skip (see page 104). other video equipment connected to the TV Cannot operate Menu ❏ If a menu option appears in gray, this indicates that the TV is in a state in which the menu option is not available. Lost password ❏ In the password screen (see page 100), enter the following master password: 4357. The master password clears your previous password; it cannot be used to temporarily unblock channels. LED on front panel is lit ❏ The STAND BY LED (see page 15) blinks when the TV is turned on, then shuts off when the picture is displayed. If the LED blinks continuously, this may indicate the TV needs service. ❏ The TIMER LED (see page 15) indicates that the timer is set. When the timer is set, this LED will remain lit even when the TV is turned off. ❏ The i.LINK STANDBY LED blinks when the signal from an i.LINK device is being shown. The signal from a selected ❏ If you have several i.LINK devices connected and operating at once, the TV i.LINK device is not being may not be able to display the signal from the selected device. Turn the displayed other i.LINK devices off, and reselect the desired i.LINK device. SETUP Other Info Other Info Other Info 114