Sony KDP-57XBR2 Primary User Manual (Large File - 14.16 MB) - Page 33
Connecting a Satellite Receiver
View all Sony KDP-57XBR2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Setting Up the Projection TV Connecting a Satellite Receiver 1 Connect the satellite antenna cable to the satellite receiver's SATELLITE IN jack. 2 Using an A/V cable, connect the satellite receiver's Audio and Video OUT jacks to the projection TV's Audio and Video IN jacks. 3 Connect a coaxial cable from your cable or antenna to the projection TV's CABLE jack. ✍ If the receiver you are connecting has an S VIDEO jack, you can use an S VIDEO cable for improved picture quality (compared to a combination audio/video cable). Because S VIDEO cables carry only the video signal, you will also need audio cables for sound. Coaxial cable TV AUDIO-R (red) AUDIO-L (white) VIDEO (yellow) Satellite receiver A/V cable Satellite antenna cable 23
Setting Up the Projection TV
23
Connecting a Satellite Receiver
1
Connect the satellite antenna cable to the satellite receiver
’
s
SATELLITE IN jack.
2
Using an A/V cable, connect the satellite receiver
’
s Audio and
Video OUT jacks to the projection TV
’
s Audio and Video IN
jacks.
3
Connect a coaxial cable from your cable or antenna to the
projection TV
’
s CABLE jack.
If the receiver you are connecting has an S VIDEO jack, you can use an S VIDEO
cable for improved picture quality (compared to a combination audio/video
cable). Because S VIDEO cables carry only the video signal, you will also need
audio cables for sound.
TV
Satellite receiver
Satellite
cable
A/V cable
Coaxial
cable
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
antenna